Smart card readers / Lecteurs de cartes à puce
Mullion / Meneau de porte
Technical Specifications
Mullion
Single Gang
Model
KT-MUL-MT-KP
KT-MUL-MT
KT-MUL-SC
KT-SG-MT-KP
KT-SG-MT
KT-SG-SC
RF technologies
13.56 MHz
125 kHz
13.56 MHz
125 kHz
13.56 MHz
13.56 MHz
125 kHz
13.56 MHz
125 kHz
13.56 MHz
Power consumption (mA) @ 12
VDC Peak / AVG
200 mA / 80 mA 120 mA / 70 mA 120 mA / 70 mA 200 mA / 80 mA 120 mA / 70 mA
120 mA / 70 mA
Weight
110 g (0.24 lb) 110 g (0.24 lb) 105 g (0.23 lb)
175 g (0.4 lb)
170 g (0.37 lb)
165 g (0.36 lb)
Capacitive Touch Keypad with
backlighting
Yes
No
No
Yes
No
No
Typical read range 125 kHz
ioProx ID-1 credentials (Cards)
Up to 5.1 cm (2 in.)
--
Up to 6.8 cm (2.7 in.)
--
Typical read range 13.56 MHz
MIFARE Plus EV1, encrypted
sector, ID-1 credentials (Cards)
Up to 3.8 cm (1.5 in.)
Up to 4.3 cm (1.7 in.)
Mounting
Mullion
Single Gang, North America / Europe
Dimension
(H x W x D)
115.8 x 44.6 x 24.7 mm (4.56 x 1.75 x 0.97 in.)
115.8 x 71.5 x 24.7 (4.56 x 2.81 x 0.97 in.)
Supported credentials 125 kHz
ioProx and HID®
--
ioProx and HID®
--
Supported credentials 13.56 MHz
MIFARE Plus EV1, iClass CSN, and ISO/IEC 14443A/14443B/15693 CSN
Supported credentials BLE
(Bluetooth low energy) 2.4 GHz
ioSmart mobile credentials and smart keys
Wiring terminal
6 screwless poles
Tamper
Optical
Wiegand communication formats
Kantech SSF, Kantech XSF, 26-bit, 34-bit, HID Prox
Sounder
Integrated
Security: AES-128 bit encryption
From the ioSmart card to the reader. From the reader to the access control unit over RS-485.
Security: AES-256 bit encryption
From the ioSmart mobile credential to the reader. Not verified by UL.
Output
RS-485 or BLE panel-less: 1 supervised open-drain, up to 750 mA
Operating temperature
- 40°C to +70°C (- 40°F to +158°F). - 35°C to +66°C (- 31°F to +151°F) for UL listed product.
Operating humidity
0 to 95% non-condensing. UL verified at 85% Rh.
LED indicator
Multi-color bar: Red, green, yellow, blue. Configurable.
Inputs in Wiegand mode
LED and buzzer
Inputs in RS-485
2 to 4, configurable
Inputs in BLE panel-less
2 configurable
Input voltage
8.5 VDC to 16 VDC (provided by UL 294 or UL 603 listed, power limited power source).
Housing
Polycarbonate, smoked black
Flammability rating
UL94 V-2
Firmware
Fully upgradable using RS-485
Ingress protection rating
IP55 (not verified by UL)
Communication
Wiegand, RS-485 (AES-128), OSDP (AES-128 using RS-485), or BLE (AES-128, or AES-256, not veri-
fied by UL)
Cabling
3 twisted pairs AWG 22 unshielded or CAT5, up to 150 m (500 ft)
Warranty
Limited lifetime
Certifications
FCC, IC, CE, UL 294, UL 1076, UL 2610, FIPS 197, RoHS, WEEE.
For RS-485, NIST CAVP validation number AES 3667, key length 128.
Note:
For more information about wiring distances, refer to the
ioSmart Card Reader Installation Guide
.
