background image

 PDX16(This product)

E-Switch Adapter

Accessory

 Serial Bus Adapter (2)

 

8chSignal Cables

 (

2

)

  

Manual

OPERATION

MANUAL

man_pdx16_en

Failure to follow these instructions can cause 

serious injury or death to the user or others.

By using high capacity batteries, it enables servos to be powered reliably.

Integrated electric switch for added safety. 

Capable to use for any other radio manufacturer systems, as it 

     only by-passes the signals.

For serial bus connection, Separate sold Bus adapter shall ease

     the connection to the unit. 

Product name: PDX 16

Dimensions: 2.36 x 3.54 x 0.59 inch

/

60x90x15 mm 

Weight: 3.44oz/ 97.5 gram

Operating voltage: under 12.6 V 

Connection Port: 16 ports

DANGER 

 Do not use this product in the rain as water may cause electronic devices to malfunction.

 This product carries a risk of injury due to heat, fire and electric shock.

 Never disassemble or modify this product.

 Only use the correct input voltage.

 Be sure to check the polarity when you input the battery connector to this product.

 Reversing connection/polarity may damage this product. 

 Be sure to check the battery capacity upon operating this product, if the battery capacity 

     is under the operational voltage, this product may not function properly.

 Please check that all screws are securely tightened on product.

 Do not use this product if there is even slight damage to the wire harness, connectors, 

     or other assemblies.

 Properly secure excess wires in place to avoid excess movement and damage.

Thank you for purchasing this product.

To allow correct and safe use of this product,
please read this operation manual

FEATURES

SPECIFICATION

CONTENTS

Konishi Mokei Co., Ltd. (RC DEPOT)
1-3-17 Izumi, Noda-City, Chiba-Pref. 270-0239 JAPAN

For U.S.A.: service@deeforce.net (Ph: 217-369-2854)
For Australia: info@rcdepot.com.au (Ph:07-3879-6692)
For other overseas Countries:  rcdepot.overseas@gmail.com

▲     ▲

T

   

 B

TOP

BOTTOM

BOTTOM

TOP

XT60 DEANS

There are two choice 

of the battery conne-

ctor available as

Deans or XT60

There is no polarity on switch plug.

Electric Switch

)Negative terminal

)Positive terminal

)Negative line (Black)

Be sure to insert the connector 

    harness in correct direction 

Signal Output Ports

1−

8

Signal Output Ports

9−

16

Signal input Ports

Receiver

Battery

such as

Li-Po 3S

)Positive line (RED)

)Negative terminal

)Positive terminal

Signal terminal

This product shall feed the exact input voltage to the servo operating 

voltage. Be sure to use specified voltage on the servo.

配 置 図

SERVO OUTPUT PORT

Input signal is directly sent unre-

gulated to the output terminals. 

 

 PWM Input => PWM Output

 Bus Input => Bus Output

Note: Under the Serial connection

use, never connect PWM servos.

Quick feature on this product.

Be sure to check the polarity before 

actual insertion of the connectors.

Using a high capacity , the PDX16 by-passes the 

receiver, delivering maximum reliable power directly 

to the servos. The PDX16 safely delivers the correct 

voltage requirements to the receiver. The receiver now 

delivers only the control signals to the servos through 

the PDX16, not the power.  

 PDX16 works with both PWM and Serial Bus 

technology and is compatible with most other radio 

manufacturer’ s  systems. 

 PDX16 is compatible with super hi voltage servos 

(12v)3S Li-Po(12.6v) packs can be used with 12v super 

high voltage servos.

Reviews: