background image

LB management

Universal timer Bluetooth

Universal timer Bluetooth
Art. no.: ..1751BT..

Operating instructions

1

Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.

These instructions are an integral part of the product, and must remain with the end customer.

2

Device components

Figure 1: Device components

(1)

Insert

(2)

Frame

(3a) Blind/shutter up / light on, brighter
(3b) Blind/shutter down / light off, darker
(4a) Disabling function
(4b)

Ʃ

 = activate Bluetooth coupling, 

Activating / deactivating automatic operation

(5)

Function LED
Red = Disabling function active
Orange = Automatic operation deactivated
Blue = Bluetooth connection active
Flashing blue = Bluetooth coupling mode active
Flashing blue three times = Time is not set

(6)

Status LED
Green = Blind/shutter activated / light switched on
Red = Error message or reset

Priorities for the LED display: 
- Red LED before green or orange LED 
- Blue LED before red LED

1 / 10

32598103

02.10.2019

J0082598103

Summary of Contents for 1751BT Series











Reviews: