background image

INSTRUCTIONS

LD-HD2KU/LD-HD2KE

®

DIGITAL VIDEO PROCESSOR

LD-HD2KU

For customer Use:

Serial No.

Model No.

Enter below the Serial No. which is located
on the side panel of the cabinet. Retain 
this information for future reference.

OFF

VIDEO

S-VIDEO

PASS-T

MENU

RGB

YCrCb

BRIGHTNESS

CONTRAST

COLOR

DETAIL

ANAMORPHIC

TINT

4:3

LETTERBOX

PASS-TX

PROFILE

1

2

3

4

5

6

7

8

9

0

STORE

®

LCT1679-001A

This product (LD-HD2KU) is exclusively for the
above-mentioned model. The performance cannot
be guaranteed when using with other models.
This processor is used as a dedicated machine and
this manual (instruction manual) may contain de-
scription of features as well as specifications not
used by the processor.

This product (LD-HD2KE) is exclusively for the
above-mentioned model. The performance cannot
be guaranteed when using with other models.
This processor is used as a dedicated machine and
this manual (instruction manual) may contain de-
scription of features as well as specifications not
used by the processor.

Machine Models Compatible for Con-

nection with this Product

DLA-HD2KU

DLA-HD2KE

Summary of Contents for D-ILA LD-HD2KE





















Reviews: