background image

Page 1

January 15, 2004 10:52 am

— 1 —

ENGLISH

EN

VIDEO CASSETTE RECORDER

HR-J693U

INSTRUCTIONS

LPT0889-001A

Printed in China

COPYRIGHT © 2004 VICTOR COMPANY OF JAPAN, LTD.

0104MAR-PR-BJ

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder. Before use, 
please read the safety information and precautions to ensure safe use of 
your new VCR.

CAUTIONS

Failure to heed the following precautions may result in damage to the VCR, 
Remote or video cassette.

1. DO NOT place the VCR …

… in an environment prone to extreme temperatures or humidity.
… in direct sunlight.
… in a dusty environment.
… in an environment where strong magnetic fields are generated.
… on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR’s ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the VCR or on the 

Remote.

5. AVOID violent shocks to the VCR during transport.

Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette 
recorder. However, S-VHS recording is not possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it 
possible to play back S-VHS recordings with regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO 
RAIN OR MOISTURE.

CAUTION:

This video cassette recorder should be used with AC 120V

d

, 60Hz only.

To prevent electric shocks and fire hazards, DO NOT use any other power 
source.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO 
WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS 
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE 
ET POUSSER JUSQU’AU FOND.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 
820-40 of the NEC that provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be connected to the grounding 
system of the building, as close to the point of cable entry as practical.

NOTE:

Changes or modifications not approved by JVC could void the user’s 
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 
Consult the dealer or an experienced radio TV technician for help.

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if 
mistreated. Do not recharge, disassemble, heat above 100°C or incinerate.
Replace battery with CR2032. Panasonic (Matsushita Electric) or Maxell is 
recommended. 
Danger of explosion or Risk of fire if the battery is incorrectly replaced.

Disposed of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

Declaration of Conformity

Model Number:

HR-J693U

Trade Name:

JVC

Responsible Party:

JVC Americas Corp.

Address:

1700 Valley Road Wayne, N.J. 07470

Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause 
undesired operation.

For Customer Use:

Enter below the Model No. and Serial No. which are located on the rear 
of cabinet. Retain this information for future reference.
Model No.

Serial No.

HR-J693U_EN.fm  Page 1  Thursday, January 15, 2004  10:52 AM

Summary of Contents for HR-J693U

















Reviews: