background image

RK-C42WBT3

Thank you for purchasing this Wall Mounting Unit.

We recommend that you read this manual thoroughly before use in order to familiarize yourself with this unit.

Please store this manual in a safe place after reading it.

Mounting a plasma display television requires specific technical knowledge. Do not attempt to mount the unit by yourself.

Please be aware that screw holes and anchor bolts will remain in the wall surface if the Wall Mounting Unit is removed

after having been mounted to the wall.

Long-term use of the plasma display may result in discoloration of the wall surface due to heat/air emitted by the display.

Wall Mounting Unit

Assembly and Mounting Instructions

For Assembly By Authorized Service Personnel Only

Consult authorized service personnel for the installation of this unit. Installation

instructions must be followed precisely in order to prevent accidents. We are

selling this product with the understanding that it will be assembled and installed

by properly trained and qualified service personnel.

We are not liable for any damage caused by faulty assembly,
faulty wall mounting, insecure wall mounting, misuse,
alterations, or natural disasters.

This unit weighs approx. 60 kg (approx. 132 lbs.) including plasma display

monitor. Incomplete or inadequate mounting of this unit to the wall may cause

it to fall down, resulting in potentially fatal accidents.

Please consult authorized service personnel for the installation of this unit.

Danger

Summary of Contents for RK-C42WBT3

















Reviews: