background image

-

 1 -

 

Ver. 1.0 05042010 

RSAL3 

Anamorphic Lens System 

For JVC D-ILA Projector models: 

Reference Series DLA-RS15/DLA-RS25/DLA-RS35 

 

 

 

 

 

 

 

 

 

 

 

 

Summary 

The  RSAL3  is a high performance customized anamorphic lens system designed specifically  for the above 
ceiling mounted JVC projectors to provide the ultimate in true 2.40:1 cinema immersive theater environments.  
It is designed to be very easy to install and is used with custom JVC projector settings to make home theater 
projection on a 2.40:1 aspect ratio screen as plug and play as possible.   

 

 

 

Summary of Contents for RSAL3

Page 1: ...ce customized anamorphic lens system designed specifically for the above ceiling mounted JVC projectors to provide the ultimate in true 2 40 1 cinema immersive theater environments It is designed to be very easy to install and is used with custom JVC projector settings to make home theater projection on a 2 40 1 aspect ratio screen as plug and play as possible ...

Page 2: ...e sure the projector ceiling mount is secure since the anamorphic lens system will add mass to the front of the projector Insert the lens mounting screws into the two holes in the top of the ceiling mounted projector just above the projector lens location Leave at least 1 8 3mm of thread remaining This can be done by hand Make sure the Fine Tilt knob has approximately the same amount of thread sho...

Page 3: ... projector and to use these controls to begin with the best image possible An experienced installer may choose to apply the following steps in combination with the pixel offset controls for the most flexibility Loosen the large screws that hold the RSAL3 lens in its bracket so that it is free to tilt At this point it will be supported by the Fine Tilt Adjustment screw Turn the Fine Tilt Adjustment...

Page 4: ...ojector lens or your RSAL3 lens can produce a measurable reduction in contrast The most effective cleaning approach is to simply blow off any dust If there is any residue or build up then it is recommended that you clean the optics with professional lens cleaning supplies such as from a camera store while the lens is in front of the lit beam of the projector This will allow you to quickly see both...

Reviews: