RLS2 QUICK REFERENCE GUIDE
Menu / Customizable Settings
•
Press and hold DIM / MENU button
for 3 seconds. The voice will
announce, “Menu,” and the display will read
*MENU*
.
•
Press and release DIM / MENU button
to scroll through the
preferences until you reach the option to be changed.
•
To change setting,
press and release
or
button
. Both
the display and voice will announce the change.
•
Press and release DIM / MENU button
to continue scrolling to
another preference.
^
^
1
Voice Type
Female Choose male or female voice for audio alerts.
2
Audible Voice
On
For all initial audio alerts: “Voice On” uses
voice; “Voice Off” uses tones only.
3
Wake-Up
Wake- “Wake-Up Long” is a standard 5-second
Up
sequence. “Wake-Up Short” uses an abbre-
Long
viated sequence.
4
Speed Displayed
On
“Speed On” displays current speed in
mph / kph when driving over 5 mph / kph.
“Speed Off” turns off this display.
5
Compass Heading
On
Displays current compass heading when
driving over 5 mph / kph.
6
Traffic Sensor
Off
Enables filtration of K-Band radar signals
Filter
from traffic flow sensors.
7
mph / kph
mph
Choose mph or kph.
8
Automute
Off
Automatically reduces volume by 50% after
5 seconds.
9
X-Band
On
Enables the detection of X-Band radar.
10
K-Band
On
Enables the detection of K-Band radar.
11
Ka-Band
On
Enables the detection of Ka-Band radar.
12
Laser
On
Enables the detection of laser.
13
Mute Locations
N/A
Clears all stored muted locations. See Pg. 12
14
Alert Locations
N/A
Clears all stored alert locations. See Pg. 13
15
Factory Reset
RESET Original factory default for all settings.
Default
Setting
Menu Options
(in order displayed)
Description
