Step 1 (Open legs and attach arms)
Lay the chair flat and open the front legs. Align the hole on the front side of the arm with the front leg.
Insert a short bolt into the washer, arm and front leg. Slide on another washer and tighten a nut onto
the bolt.
Step 2 (Attach back of arms)
Lift the back up and insert a long bolt into the washer, back of the arm and back. Slide on anoth-
er washer and tighten a nut onto the bolt.
(With the legs out and seat back already up, repeat steps 1 & 2 for opposite side)
POLY ADIRONDACK ROCKING CHAIR
EASY ASSEMBLY INSTRUCTIONS
1
