background image

Instructions for use

INTRAcompact contra-angle 0768 LHC - REF

1.004.7783

D

Distributed by:

KaVo Dental GmbH

Bismarckring 39

D-88400 Biberach

Tel. +49 7351 56-0

Fax +49 7351 56-1488

Manufacturer:

Kaltenbach & Voigt GmbH

Bismarckring 39

D-88400 Biberach

www.kavo.com

C

Contents

1 User instructions ............................................................................................................................................... 5
2 Safety  ............................................................................................................................................................... 7

2.1

Description of safety instructions ............................................................................................................ 7
2.1.1 Description of safety instructions: Warning symbol ................................................................... 7
2.1.2 Description of safety instructions: Structure  .............................................................................. 7
2.1.3 Description of safety instructions: Description of danger levels  ................................................  8

2.2

Safety instructions  .................................................................................................................................. 9

3 Product description ......................................................................................................................................... 16

3.1

Purpose – Proper use  .......................................................................................................................... 17

3.2

Technical Data  ..................................................................................................................................... 19

3.3

Transportation and storage conditions  ................................................................................................. 20

Contents

1

44 First use .......................................................................................................................................................... 22

4.1

Check the amount of water  .................................................................................................................. 24

5 Operation ........................................................................................................................................................ 25

5.1

Attaching the medical device ................................................................................................................ 25

5.2

Removing the medical device  .............................................................................................................. 27

5.3

Inserting the milling cutters or diamond grinders .................................................................................. 28

5.4

Removing the milling tool or diamond grinder  ...................................................................................... 31

6 Troubleshooting .............................................................................................................................................. 34

6.1

Check for malfunctions ......................................................................................................................... 34

6.2

Troubleshooting .................................................................................................................................... 35
6.2.1 Troubleshooting: Exchanging the O-rings on the motor coupling  ...........................................  35
6.2.2 Troubleshooting: Cleaning the spray nozzle  ........................................................................... 37

7 Setup methods according to DIN EN ISO 17664  ........................................................................................... 38

7.1

Preparation at the site of use  ............................................................................................................... 38

Contents

2

Summary of Contents for 1.004.7783


















Reviews: