background image

settings may be used with any cycle setting. The 

AIR

FLUFF-NO HEAT

 setting can be used only in the Timed

Dry cycle.

AIR FLUFF-NO HEAT 

 setting tumbles the load without

heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

The Automatic and Timed Dry cycles end with a cool
down period.  The heat automatically turns off and
the load continues to tumble during the cool down
period. This reduces wrinkling and makes items
easier to handle during unloading.

Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying time.

OPERATING INSTRUCTIONS

81142/91142

Before Operating Your Dryer

Read your dryer Use and Care Guide. 

It has

important safety and warranty information. It also has
many suggestions for best drying results.

  To reduce the risk of fire, electric

shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Use and Care
Guide before operating this appliance.

Operating Steps

Read 

Drying Procedures

 in your Use and Care

Guide. It explains these operating steps in detail.

1. Prepare items for drying.

2. Check that lint screen is clean and in place.

3. Load the dryer. 

If desired, add a dryer fabric

softener sheet.

4. Close the dryer door.

5. Set Temperature and Cycle Signal controls.

6. Turn cycle selector clockwise to desired

setting.

7. Start dryer. 

Turn the Turn to Start control

clockwise to ON. 

Hold for 1-2 seconds and

release.

8. When Cycle Signal control is on, a signal will

sound at the end of the cycle.

9. Remove items immediately and hang or fold.

10. Clean lint screen after every load.

Temperature Selection

Always follow directions on fabric care

labels.

 

  To avoid fire hazard, do not use heat to

dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Air Fluff-No Heat cycle only.

The

 REGULAR-HIGH HEAT, PERM PRESS-MEDIUM

HEAT

, and 

KNITS/DELICATES-LOW HEAT 

temperature

Printed in U.S.A.

P/N 134023600   (0101)

Reviews: