background image

KisanKraft

TM

 

Warranty Certificate 

(D

EALER 

C

OPY

 

This warranty is null & void, if you fail to register the warranty with 

KisanKraft by sending the KisanKraft Copy with dealer’s stamp. 

KisanKraft Machine Tools Private Limited 

: www.kisankraft.com

 

: info@kisankraft.com

 

: +91.80. 22178200

 

 

Page 1 of 48 

Product 

Intercultivator 

KisanKraft

TM 

Invoice Date   

Brand 

KisanKraft

 

KisanKraft

TM 

Invoice No. 

 

Model 

KK-IC-8626

 

W

ARRANTY 

P

ERIOD

 

6

 MONTHS

 

F

OR THE SPECIFIED PERIOD FROM THE 

DATE OF SALE OR DELIVERY WHICHEVER IS 
EARLIER

Dealer’s 

Invoice Date   

Dealer’s 

Invoice No. 

 

Buyer’s Info (

Name, Address, Phone, etc.):

 

Dealer’s Stamp (

Address, Phone, TIN, etc.):

 

Buyer’s Sign   

Dealer’s Sign   

What is covered: 

KisanKraft Machine Tools Private Limited and its manufacturers 

warrant this product to be free from defects in material or workmanship. All parts 

defective in material and workmanship are covered. 

This warranty will only cover defects arising under normal usage. 

This warranty is limited to repair or replacement by KisanKraft Machine Tools Private 

Limited or its manufacturers at the premises of Authorized Dealers, of such parts as 

appear to KisanKraft or its manufacturers, upon inspection, to be defective in material 

and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to 

trade accessories not manufactured or sold by them. 

What is not covered: 

The 

warranty shall become null and void

 and neither KisanKraft 

Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers 

assumes any responsibility, if the failure was caused by the following: 

(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine 

or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, 

(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper 

set up, adjustments, tampering or altered products 

 

Summary of Contents for KK-IC-8626

















































Reviews: