Wall venting
3-1/4" x 10"
(8.3 cm x 25 cm)
vent through
the wall
wall
cap
Roof venting
3-1/4" x 10"
(8.3 cm x 25 cm)
vent through
the roof
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
VENTING REQUIREMENTS
KHTU160K
KHTU100K
Electrical:
120-volt, 60-Hz, AC-only, 15-amp.
electrical supply. Use copper wire only. A time-
delay fuse or circuit breaker and separate circuit
is recommended.
30" and 36" Traditional Series Vented and Non- Vented
Range Hoods
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 8284977
08-20-02
®
3-1/4" x 10”
(8.3 cm x 25 cm)
90° elbow
wall
cap
Maximum length
= 26 ft.
(8 m)
1 — 90° elbow
= 5 ft. (1.5 m)
9 ft. (2.8 m) straight
= 9 ft. (2.8 m)
1 — wall cap
= 0 ft.
(0 m)
Length of 3-1/4" x 10"
(8.3 cm x 25 cm)
system = 14
ft.
(4.3
m)
6 ft. (1.8 m)
3 ft.
(0.93 m)
3-1/4" x 10" (8.3 cm x 25 cm)
vent system
Recommended vent system length
Use 3 1/4" x 10" (8.3 cm x 25 cm) vent with maximum length of
26 feet (8 m) for vent system. For best performance, use no more
than three 90° elbows. To calculate the length of system you need,
add the equivalent feet (meters) for each vent piece used in the
system. See the following example.
Recommended
standard fittings
3-1/4" x 10"
(8.3 cm x 25 cm)
90° elbow
= 5 ft. (1.5 m)
3-1/4" x 10"
(8.3 cm x 25 cm)
flat elbow
= 12 ft. (3.7 m)
3-1/4" x 10"
(8.3 cm x 25 cm)
wall cap
= 0 ft. (0 m)
7-3/4"
(19.6 cm)
9-15/16"
(25.2 cm)
3-3/16"
(8.1 cm)
Note: Underside of hood must be a minimum of
24" (61 cm) from cooking surface.
2-11/32"
(6.0 cm)
1-3/4"
(4.4 cm)
Do not
use these
knockouts
1-13/16"
(4.6 cm)
2-9/16"
(6.5 cm)
1-9/16"
(4.0 cm)
1-3/16"
(3.0 cm)
1-3/16"
(3.0 cm)
4-3/4"
(12.1 cm)
5-1/16"
(12.9 cm)
9-27/32"
(25.0 cm)
17-3/4"
(45.1 cm)
13-3/8"
(34.0 cm)
30" (76.2 cm)
36" (91.4 cm)
Roof-vented model shown.
