background image

ENGLISH

The Klein Tools PowerBox1 is a multi-port AC and USB 

power distributor with powerful LED work light and surge 

protection.

CONTENTS

•  29601 PowerBox1

•  Instruction Sheet

GENERAL SPECIFICATIONS

•  AC Power Cord: 

5 ft. (1.5 m), 14ga, NEMA 5-15P,

SJTW Jacket (105C/300V)

•  AC Input:

 Nominal 120V AC, 15A, 60Hz

•  AC Output: 

NEMA 5-15R, 120V/15A, 60Hz,

 Max. output 1875W

•  Surge Protection: 

2160 Joules, Class 3, 600V (L-N, L-G,

N-G)

•  Over-current Protection: 

125V, 15A

•  USB Output (total 45W): 

USB-A:

 5V/2.4A

USB-C:

 5V/3.0A, 9V/3.0A, 12V/3.0A, 15V/3.0A,

20V/2.25A,

Power Delivery (PD) compliant

•  LED Work Light Output: 

100 lumens

•  Magnets: 

Neodymium, N35

•  Operating Temperature: 

14

°

 to 122

°

F (-10

°

 to 50

°

C)

•  Storage Temperature: 

-4

°

 to 158

°

F (-20

°

 to 70

°

C)

•  Operating Altitude: 

6562 ft. (2000 m)

•  Operating Humidity:

 85% non-condensing

•  Dimensions: 

5.85" × 1.80" × 4.73" (149 × 46 × 120 mm)

•  Weight:

 1 lb., 10.6 oz. (0.75 kg)

•  Drop Protection: 

6.6 ft. (2 m)

• Standards: 

 FCC,  IC

Conforms to UL STD. 498, 1310, 1363, 1449; 
Certified to CSA STD.C22.2 NO. 42, 223, 

269.3, 308.

Specifications subject to change.

 WARNINGS

Read, understand, and follow these instructions to ensure 

safe operation. Failure to observe these warnings can 

result in risk of fire, electric shock, serious injury and/or 

property damage.
• DO NOT use the product that is damaged or modified.
• DO NOT subject to vibration, impacts or drops. The 

housing may not show signs of damage, but internal 

components may have been compromised. It is 

advisable to replace the unit if any such severe events

occur.

• DO NOT expose to rain or snow.
• Keep away from high voltage devices.
• DO NOT attempt to insert other USB connector types into

the USB-C or USB-A ports.

• DO NOT overload surge protector (1875W maximum).
• Use indoors and in dry locations.
• DO NOT connect to an ungrounded outlet.
• DO NOT use with extension cord adapters that eliminate

the connection to ground.

SYMBOLS ON PRODUCT

Warning or Caution

Risk of Electrical Shock

Strong Magnetic Field

Read Instructions

VI

Level VI Efficiency Standard

FEATURE DETAILS (FIG.A)

1

5' (1.5 m) AC Power Cord

7

Work Light Power Button

2

AC Power On/Off Switch

8

Surge Protection Indicator

3

120V AC Power Outlets (

×

4)

9

Grounded Input Indicator 

4

USB-C Output (PD Compliant)

10

Mounting Locations (

×

4)

5

USB-A Outputs (

×

2)

11

Magnets (

×

4)

6

Work Lights (

×

2)

12

Mounting Location Guide 

(see last page)

5017951 

OPERATING INSTRUCTIONS

NOTE: Grounded Input Indicator

 

9

 will illuminate when an 

active ground is present on AC supply.
NOTE: Surge Protection Indicator

 

8

 will illuminate when the 

unit is surge protected.

Plug the AC Power Cord 

1

 into a functional standard U.S. 120V 

AC receptacle to supply power to the unit.
Use the AC Power Switch 

2

 to supply power to the AC Outlets 

3

 and USB ports 

4

5

.

LED Work Lights 

6

 are activated by pressing the Work Light 

Power Button 

7

.

MOUNTING INSTRUCTIONS

NOTE: Disconnect power when mounting the PowerBox1.

NOTE: When mounting by fastener or nail, use all four mounting 

locations 

10

.

COMPLIANCE

FCC & IC COMPLIANCE 

 

This device complies with part 15 of the FCC RULES and 

Industry Canada license-exempt RSS standard(s). Operation 

is subject to the following two conditions: (1) this device may 

not cause harmful interference, and (2) this device must accept 

any interference received,including interference that may cause 

undesired operation.

NOTE: 

The grantee is not responsible for any changes or 

modifications not expressly approved by the party responsible 

for compliance. Such modifications could void the user’s 

authority to operate the equipment.

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

IC NOTICE TO CANADIAN USERS

IC Compliance Statement: This device complies with industry 

Canada license-exempt RSS standard(s). Operation is subject 

to the following two conditions: (1) This device may not cause 

harmful interference, and (2) This device must accept any 

interference received, including interference that may cause 

undesired operation of the device.

MAINTENANCE

CLEANING: 

Be sure device disconnected from all power sources 

and devices. Use clean, dry, soft, lint-free cloth to wipe down the 

entire unit. 

Do not use abrasive cleaners or solvents.

STORAGE: 

Store in cool temperatures, mild humidity, and away 

from direct sunlight (See GENERAL SPECIFICATIONS). Leaving 

in a vehicle or other confined spaces in extreme hot temperatures 

can lead to decrease in service life, overheating, or fire. Extreme 

cold temperatures below the specified storage range can also 

harm performance and service life. Keep away from corrosive 

chemicals and gases. After taking out of storage, inspect visually 

to make sure device and all accessories look satisfactory. Allow 

unit to return to ambient conditions before using.

WARRANTY

www.kleintools.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. 

Items must be properly disposed of in accordance with 

local regulations. Please see 

www.epa.gov

 or 

www.

erecycle.org

 for additional information.

29601

PowerBox1 - 

Instructions

FRONT

3

7

5

6

4

9

8

2

1

BACK

10

11

www.

GlobalTestSupply

.com

Find Quality Products Online at:

sales@GlobalTestSupply.com

Reviews: