background image

 

SAFETY AND INSTALLATION INSTRUCTIONS

120106-SM

HELPLINE:

 

• T: 01933 673 144  

• F: 01933 678 083  

• E: sales@eterna-lighting.co.uk 

Visit our website: 

www.eterna-lighting.co.uk

LAMP REPLACEMENT:

1. Unplug or switch off the electricity at the mains.

2. Release the front cover screws.

3. Remove and replace lamp. Use a soft cloth; do not touch with bare fingers.

4. Refit front cover, ensure gasket is in position and tighten screws.

 

REPLACEMENT LAMP TYPE:

Wattage:    

1300W 

Supply Voltage:  

240V 

Size:  

   

255mm 

Type:      

R7 IR Ruby Halogen

 

EVENTUALLY, YOU MAY WANT TO REPLACE THIS LIGHT FITTING:

When your product comes to the end of its life or you choose to update or upgrade it by replacing 

it, please do not dispose of it with your normal household waste and please recycle where facilities 

exist. When you need to dispose of this fitting you can check with your retailer or local authority 

for suitable options. New regulations require the recycling of Waste from Electrical and Electronic 

Equipment (European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd 

January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.

 

Model:

  

PAT1300W

1300W WALL MOUNTED PATIO HEATER

These instructions are provided as a guideline to assist you.

 

PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING 

PLEASE RETAIN FOR FUTURE REFERENCE

Pack contents:

1 x heater c/w 5m mains 

lead with 3-pin plug
1 x mounting bracket 
1 x bolt
1 x locknut

IP54

1m

Reviews: