With three mounting sizes available, the KeyDefender can be installed in multiple locations within the vehicle
using the RAM® mount system. RAM® mounts have an adjustable arm with 2 adjustable bases on the top
and bottom. The handle can be rotated to loosen the bases and then tightened to lock the bases into the
preferred position.
Included are security fasteners to mount the KeyDefender to the RAM® mount. Fasteners are not included
to mount the RAM® bracket to the vehicle interior. Customers are responsible for determining an adequate
mounting location and securing the RAM® Mount to the interior of the car. The maximum fastener length into
the back of the KeyDefender is 5/8”.
KNOX KEYDEFENDER
™
MOUNTING INSTRUCTIONS
OPE-ESYSLR-0551-C
1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 |
T.
800-552-5669 |
F.
623-687-2290 | TECHSUPPORT@KNOXBOX.COM |
KNOXBOX.COM
©Knox Company. All rights reserved. RAM® is a registered trademark of National Products Inc.
KNOX PART NUMBER
DESCRIPTION
KD-MB-R5
KeyDefender Mounting Bracket 5”
KD-MB-R7
KeyDefender Mounting Bracket 7”
KD-MB-R11
KeyDefender Mounting Bracket 11”
KeyDefender Mounting Instructions
Included in all Knox RAM® Mount Packages
•
RAM® Mount (one of 3 different sizes)
•
RAM® Pin-Lock™ 5-Pin Security Knob
•
4 Security fasteners 8-32 3/8”
•
Tamper Resistant T15 Torx Bit 1/4” hex shank
RAM® Mount Sizes
