sp
l1tty
LED desk lamp
Assembly Instructions
0
Base
\
Power Supply
\
�
� Lamp Body
Touch the
C)
button to turn on & off, hold it to dim/
brighten the light.
Five Year Limited Product Warranty
Attach the LED head to the lamp body
0
Charge your USB device with the built-in 1.0A USB port.
(Splitty Pro: USB port outputs 2.0A)
Koncept warrants to the original purchaser of this product against manufacturer defects in design, assembly, material, or
workmanship, and will, at Koncept's option, replace or repair any defective product free of charge. This coverage is valid for five years
from the date of purchase as long as the original purchaser owns the product. Koncept will replace or repair the product, which
Koncept, at its sole discretion, agrees is defective, free of charge provided that the following conditions for a return are fulfilled.
This warranty does not apply to any product damaged by accident, physical or electrical misuse or abuse, improper installation,
alteration, any use contrary to its intended function, war, fire, flood, or any other acts of nature, or unauthorized repair.
Koncept assumes no liability for any events such as fines arising out of the use of this product or any consequential damages caused
by any failure of the product to function properly. Under no circumstances should this warranty or the product covered
by
it be
construed as an insurance policy against loss of any kind. Koncept staff neither assumes nor authorizes any person or organization to
make any warranties or assume any liability in connection with the sale or use of this product. This warranty covers only products used
in the 50 US states and/or Canada. This is the complete Splittywarranty and no other warranty exists. Some jurisdictions may not allow
limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
exclusions or limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
vary in different states and countries.
To file a replacement/repair claim under the warranty:
1) Contact Koncept for a return authorization number during the warranty period. A claim will not be accepted without a return
authorization number.
2) Make a copy of the original purchase receipt with purchase date and product name clearly shown.
3) Provide original purchaser's full name, email address (optional), daytime phone, and postal address.
4) Return the defective product to Koncept freight prepaid and accompanied by (1), (2), and (3) to the following address:
e
Push the lamp body down onto the base pin and click into place
[For Splitty Pro] Built-in occupancy sensor turns lamp off if no
motion is detected for 15 minutes. When motion is
detected, the lamp turns on at the last brightness setting.
Warnings
Warning: To reduce the risk of fire, electric shock or injury:
'.\
.
• Do not use near water
£ll
•
Do not handle plug or appliance with wet hands
• Do not stare directly at LEDs
Overheating may result in reduced LED lifespan:
J.\.
•
Keep out of direct sunlight
� • Remove plastic bag from lamp before use
• Recommended ambient temperature: under 77 °F
A
Do not use an external dimmer. Doing so may cause
� damage to the product.
KONCEPT
<•------,_, ____ �=�------"=···
�
-
- - - - - - - - - -
-/
Plug transformer into the lamp
Specifications
Model
SPY
Light Color
Warm White
Color Temperature
3500 K
Brightness Adjustability Continuous
