KBox N-110 Series - Quick Installation Guide - Version 1.0 // P/N: 0D20NWA650010200
//
1
KBox N-110 SERIES - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron KBox N-110 Series network security appliance. This document provides
information to allow you to quickly install this product.
Packing Checklist
1.
Take the KBox N-110 Series out of the packing box and check if the unit is properly secure in the plastic bag.
2.
Check the contents of the carton box: (*: optional)
1x KBox N-110 Series
1x Power adapter
1x Power cord (plug type depending on country)
Memory module(s)* (It may be pre-installed in the system depending on ordered configuration.)
Internal 2.5" SATA HDD / SSD* (It may be pre-installed in the system depending on ordered configuration.)
mSATA SSD* (It may be pre-installed in the system depending on ordered configuration.)
mPCIe card* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key A expansion card* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key B SSD* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key B expansion card* (It may be pre-installed in the system depending on ordered configuration.)
Front I/O Panel
1
Power LED
2
Storage LED
3
Act / Link LED
1
5
6
9
2
5
3 3
3
3
3 3
4 4 4 4
4
4
8
9
7
11
10
