1
ASSEMBLY
OUTDOOR SOLAR GARDEN
IMPORTANT
•
Legs now include solar panel supports on 3 sides (E, S, & W)
•
DO NOT ROTATE LEG TEES OR YOU MAY NEVER REPOSITION THEM AGAIN!
•
With 2 exceptions gluing pipes and fittings is neither recommended nor needed. Not gluing
allows for adjustments during assembly and for easy disassembly for moving and storage.
Loose connections can often be tightened using Teflon tape (included)
•
The Garden is described with ends (N&S) and sides (E&W). This is important from a
horticultural standpoint because the N end receives no direct sun, the E side receives the
excellent morning sun, and the S end and W side receive the hot direct afternoon and
evening sun. The Garden’s functional components – reservoir and electrical box – are
located at the N end and Garden expansion occurs linearly to the S end.
•
Use QPlugs only, NEVER use soil or loose growing media with the Garden. The small-bore
spaghetti tubing will clog.
•
Keep the Electrical box closed and sealed. There’s lots of water around the Garden that’s
incompatible with electrical equipment and connections
•
Flat surfaces e.g. patios, decks, driveways make life easier but with shims, a level, and
patience the Garden can be situated almost anywhere. Proximity to a hose bib is a plus,
see Autofill below
•
Solar means for sun required for both plants and PV panels. Both need almost full sun to
exceed expectations. Morning sun is most important. MyGarden will disappoint in shady
locations.
Summary of Contents for My Garden
Page 21: ...21 ...
