1
2
Published
05/2020 Printed in Vietnam
© 2019 KORG INC.
www.korg.com
EFGSJ 2
En
Precautions During Assembly
• Before assembly, discharge the static electricity from your body by
touching the ground wire of a grounded device or similar methods.
Failure to do so will cause a malfunction.
• Carefully handle the circuit boards to avoid injuries that could
be inadvertently caused by protruding parts. In addition, be sure
to wash your hands with soap when finished with the assembly
procedure.
• Be sure to align screws properly before tightening them. In addi
-
tion, be careful not to tighten screws with excessive force or over
tighten them, otherwise the parts may be damaged.
• Provide a sufficiently large work space to complete the assembly
procedure, and prepare work mats so parts will not be scratched.
• Carefully handle the included screws so they will not be lost. In
addition, do not use screws other than those included for assem
-
bly, and do not use the included screws for any other purpose.
Checking package contents
Before beginning the assembly process, make sure that all of the
parts are available. Extra screws are included. Use them as spares.
If any part is missing or damaged, contact your local Korg distributor.
2
2
2
2
VOLUME
EG
FILTER
OSC
MOD
DELAY
REVERB
TRIM
INPUT
ROUTE
ARP
2
2
The video assembly tutorial for the NTS-1 digital
kit is available here
:
For more information:
https://www.korg.com/nts_1/
