background image

Model: 308-1409B/308-1409W

Instruction Manual

DC: 121815

Wireless Temperature Station

Get Started

1. Insert 2 new AA, Alkaline batteries  into the TX141-Bv2 sensor.

LED

TX Button

AA

AA

2. Insert 2 new AAA, Alkaline batteries into the station. Observe 

    the correct polarity.

3. Allow sensor and station to remain 5-10 feet apart for 5 minutes 

    to lock in the sensor signal.

4.  After 5 minutes place sensor outside in a shaded location.

AAA

AAA

LO/HI/CLEAR °F/°C/SENSOR

Summary of Contents for 308-1409B

Page 1: ...atteries into the TX141 Bv2 sensor LED TX Button AA AA 2 Insert 2 new AAA Alkaline batteries into the station Observe the correct polarity 3 Allow sensor and station to remain 5 10 feet apart for 5 minutes to lock in the sensor signal 4 After 5 minutes place sensor outside in a shaded location AAA AAA LO HI CLEAR F C SENSOR ...

Page 2: ...eratures hold the LO HI CLEAR button for 5 seconds to reset to current outdoor or indoor temperature Outdoor Sensor Search Hold the F C Sensor button for 3 seconds to search for the outdoor sensor If the signal is lost station will display the LAST DATA recorded for 10 minutes after that 10 minutes if the signal does not come back then the station will display dashes After 30 minutes station start...

Page 3: ...y well shaded area Under an eave or deck rail is preferred The maximum wireless transmission range to the station is over 300 feet 91 meters in open air not including walls or floors Be sure the outdoor sensor is mounted vertically Position Outdoor Sensor Warranty and Support La Crosse Technology Ltd provides a 1 year limited time warranty from date of purchase on this product relating to manufact...

Page 4: ...turer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment Such changes or modifications could void the user authority to operate the equipment All rights reserved This manual may not be reproduced in any form even in part or duplicated or processed using electronic mechanical or chemical process without the written permission of the...

Reviews: