background image

 
 

 

Remote Control Outlet System, RS-204U-CS 

 
 
 
 
 
 
 
 
 

 

 

Set-Up Instructions: 

1)  Install 2 AAA Alkaline batteries into remote control. 

Press four numbers to set security code (for example 
“1-1-1-1”). 

2)  Plug remote outlets into AC outlet. Press the button 

once. 

3)  Press the button on the remote control that you wish 

to use to control that outlet. 

 

Details on Set-Up: 

• 

When batteries are first inserted into the remote 
control, the LED light will blink steadily until a code is 
entered. When entering the code, pause briefly 
between each button press to be sure it is entered in 
as desired. 

• 

Once the remote outlet is plugged in, the LED will 
blink steadily until a button on the remote control is 
pressed. 

• 

To set up additional outlets on the same remote, 
follow steps 2 and three. 

• 

To set up additional remote controls, simply install 
batteries and set to the same code. 

• 

If the remote outlet is unplugged, you will need to 
follow step 2 and 3 again. 

• 

To set a new remote control button to a remote outlet 
without unplugging, press and hold the button on the 
outlet for about three seconds (LED will flash). Follow 
step 3 above. 

 

Options on setting up 

• 

One remote control can control multiple remote outlets. 
When setting up each remote outlet, simply use the same 
remote and same number to control. For example, one 
remote control, code set to “1-2-3-4”, can be set to control 
ten different holiday lights by pressing key number “1”. 

• 

Multiple remote controls can control the same remote 
outlet(s). Simply program additional remotes to the same 
code as the first. For example four remote controls can be 
placed in each corner of a large room. All of them are 
coded “2-2-2-2”. Thus, pressing key number “2” will control 
all outlets assigned to that code+number. 

• 

Each remote control has four numbered keys. Four 
separate systems can be operated on each number. For 
example key number 1 controls the holiday lights on the 
tree, key number 2 controls the main floor lamp, key 
number 3 controls the electric heater, and key number 4 
controls

 

the radio. 

 

Operation:

 

• 

To turn on the remote outlet (and thus any device plugged 
in to it), press the corresponding ON key (left side of 
remote control). 

• 

To turn off the remote outlet press the corresponding OFF 
key (right side of remote control). 

• 

To turn on/off all controlled remote outlets for that remote, 
press the “master” key, ON or OFF. 

• 

To turn on/off the remote outlet without the remote control, 
briefly press the button on the remote outlet. LED will be 
on when remote outlet is on. 

 

Safety Precautions: 

• 

The remote outlets are not rated for any outdoor use. 

• 

The remote outlet is designed for US-type plugs, 120V 
rated. 

• 

The remote outlets must be plugged only into outlets that 
are properly wired and grounded. 

• 

Do not use at the end of an extension cord 

• 

Do not expose remote outlet or remote control to water. 

• 

Allow air to circulate around remote outlet as it may warm 
up when in use. 

• 

Do not use in an application where a loss or gain of power 
is critical. The remote outlet may turn on or off at any time 
due to uncontrollable interference. 

Remote outlet 

Remote control 

• 

As with all electrical devices, keep away from children. 

• 

Not for medical purposes. 

• 

It is advised that the remote outlet be removed from outlet 
when not in use. 

 

Specifications: 

• 

Model: 

 

 

set

  RS-204 (one remote, two outlets) 

included

 

RS-220 (remote outlets) 

included

 

RS-210 (remote control with ten buttons) 

• 

Operating Voltage:

 120V 

• 

Operating Frequency: 

60 Hz 

• 

Maximum Current: 

30 Amps 

• 

Maximum Power: 

3600 Watts 

• 

Operating Temperature: 

32

°

F to 122

°

• 

Transmission Frequency: 

433 MHz 

• 

Transmission Distance: 

80 feet, optimal conditions 

 

Troubleshooting 

Problem: 

Remote control does not operate remote outlets. 

Solutions: Move 

closer to remote outlet 

 

Re-program remote outlet 

 

Replace batteries (and re-program) 

 

Warranty 

La Crosse Technology provides a 1-year warranty on this 
Remote Control Outlet System. For questions or problems, 
please contact us: 
 

La Crosse Technology 

1116 South Oak Street, La Crescent, MN 55947 

1-888-211-1923 (toll-free), 1-507-895-7095 

1-507-895-8000 (fax) 

 

e-mail 

support@lacrossetechnology.com

 

(for warranty work) 

 

sales@lacrossetechnology.com

 

(for information on other products) 

 

Or visit us on the internet at 

www.lacrossetechnology.com

 

 

Reviews: