Operation Manual
Professional Remote Weather Station WS-7015
This Operation Manual is part of this product and must stay with it. It contains
important notes on setup and operation. Please keep that in mind when handing
this product over to any third party.
A Table of Contents can be found on
Page 27
of this manual.
Keep this Operation Manual in a safe place for further reference.
1.
Introduction
Dear Customer,
We want to thank you for purchasing this Professional Remote Weather Station.
Its design and construction corresponds to all United States requirements with regard to
electro magnetic compatibility. The unit carries the FCC sign, its conformity has been
proven, the respective depositions and documents are deposited with the manufacturer.
In order to maintain this condition and ensure safe operation the user must observe this
operation manual!
With this product you have purchased a device that has been designed using the latest
technologies. Its operation is simple and straight forward. For better understanding and
optimum use of this product however please read this manual closely and carefully.
2.
Intended Use
This Professional Remote Weather Station serves to acquire and process weather data
such as wind direction and strength, precipitation, air pressure, temperature and humidity
around the home and office. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur, should any
inaccurate reading take place. This product is not to be used for medical purposes or for
public information. This product has been designed for strict use in the home and office
as an indicator of the future weather conditions and is not 100% accurate. Weather
forecasts and barometric readings given by this product should be taken only as an
indication and not as being totally accurate.
The Base Station is approved for operation with four Type Mignon AA, IEC LR6, 1.5V
batteries. The Base Station is to be used within dry, closed rooms only; outdoor use is not
permitted. Contact to moisture must be avoided in any case. The Remote Indoor Sensor
operates on two Mignon AA, IEC LR6, 1.5V batteries, all other sensors receive their
operating power from solar cells with rechargeable Lithium battery backup (included).
Any other use outside the above described will lead to damage of this product. It is
further connected with dangers such as short circuit, fire, electrical shock, etc. The
entire product may not be opened, altered or modified in any way!
