La Crosse Technology WT-8005U, Quick Start Manual

Page   3

Page   2

ATOMIC

DIGITAL CLOCK

MODEL: WT-8005U

DC:070218

Full manual can be found under the Support tab here: 

bit.ly/wt-8005-s

POWER UP

 1. Insert 2-AA batteries into your Digital Clock.
2. After Power Up, your clock will search for the Atomic Time 
    Signal for 7 minutes. Buttons will not function during the search. 
    When Atomic Time Signal is received, the clock will set itself to 
    Pacific time zone (default). Press the ZONE button to select your 
    time zone. 
    

OR

3. Press the WWVB SEARCH button to stop the initial Atomic Time 
    Search and set the time manually.
•  The clock will search for the Atomic Time Signal again after 
    midnight.
•  Press WWVB SEARCH button anytime, to start an Atomic Signal 
    Search.

•  For information about WWVB Atomic time visit: 

http://bit.ly/AtomicTime

AA
AA

SETTINGS

1.   Hold the SET button to enter the Settings Menu.
2.  Press the ARROW buttons to adjust the values. 
     Hold to adjust quickly.
3.  Press the SET button to confirm and move to the next item.
4.  Press the LIGHT button to exit.

Settings Menu Order:

• 12/24 Hour • Hour • Minutes • Year • Month  • Date

• DST on/oF (ON/OFF)

Note:

 Weekday will set automatically when Year, Month and Date 

are set.

TIME ZONE SELECTION

Press and release the ZONE button to select from four North 
American Time Zones: 

P

 = Pacific • 

M

 = Moutain • 

C

 = Central • 

E

 = Eastern

FAHRENHEIT / CELSIUS

Press and release the ºF/ºC button to select Fahrenheit or Celsius 
temperature display.

P

P

P M
C E