.9-inch LED Alarm Clock
with Dual Charging Ports
Model: 30416 & 30417
DC: 051518
POWER UP
1. Insert the 120 volt power cord into an outlet,
then into your clock.
Optional: Insert one 9 volt battery for backup.
2. 12:00 will flash as an indication to set the time
and/or alarm.
TIME SETTING
1. Continuously hold down the TIME button
while setting your hour and minutes.
2. While holding the TIME button, press the
HOUR button to set your hour.
Note:
The PM indicator will appear when
you advance to PM time.
3. While holding the TIME button press the
MINUTE button to set your minutes.
4. Release the TIME button when the correct
time is shown on the display.
TIME ALARM
1. Continuously hold down the ALARM
button while setting your alarm time.
2. While holding the ALARM button, press
the HOUR button to set your alarm hour.
Note:
The PM indicator will appear
when you advance to PM time.
3. While holding the ALARM button, press
the MINUTE button to set alarm minutes.
4. Release the ALARM button when the
correct alarm time is shown on the
display.
SNOOZE
•
When alarm sounds, press the SNOOZE
button to silence alarm for 8 minutes.
•
Snooze function can be repeated many
times if desired.
Page | 2
Page | 3
PM Light
Indicator
Alarm Light
Indicator
Time
Display
Hour Minute
Alarm
Time
Snooze
Alarm ON\OFF
Switch
PM
AL
DC5V 1 A
DC5V 2 A
TIME
H O U R
M IN
A L A R M
DIM
ME
R
HI
LO
A L
AR
M
OF
F
ON
Dimmer HI \ LO
Switch
1 Amp.
2 Amp.
USB Cord not included
ALARM ON/OFF
•
Slide the ON/OFF switch to the ON position
to activate the alarm
•
Slide the ON/OFF switch to the OFF position
to deactivate the alarm
USB CHARGING PORT
• Connect your external device’s USB charging cable
(not included) to the USB charging port.
• USB Power Output: 5V 1A or 2A maximum current.
• Charge devices that are self-regulating.
