La Crosse M76171, User Manual

C O LO R   W E AT H E R   S TAT I O N

MODEL: M76171

DC: 071321

P OW E R   U P

 1. Insert 2-AAA batteries into your Outdoor Sensor.

2. Insert the 5.0 volt USB power cord into an outlet, then into the side of 

    your Weather Station. Optional: Insert 2-AAA batteries into your station.

3. Adjust time and date settings on the station.

4. Once the Outdoor Sensor is reading to your station, place it outside in a 

    shaded location.
Watch our sensor mounting video: 

bit.ly/th_sensor_mounting

Outdoor Sensor

SH006T

Weather Station

M76171

S E T T I N G S

A L A R M

AAA

AAA

AAA

AAA

B AC K L I G H T

Power Cord: 

• Hold the ON/OFF/BL button for 3 seconds, until the Station beeps, to 

turn the continuous Backlight OFF.

• Hold the ON/OFF/BL button again for 3 seconds, until the Station beeps, 

to turn continuous Backlight ON.

• When the Backlight is off, press any button to turn on the backlight for 8 

seconds.

Batteries Only:

 Press any button to activate the backlight for 8 seconds.

 1. Press the 

SET/AL SET

 button so the word “TIME” shows in front of the 

time.

2. With the word “TIME” showing, hold the 

SET/AL SET

 button to enter the 

main Settings Menu. 

3. Once the settings begin flashing, let go of the 

SET/AL SET

 button and 

use the 

ARROW

 buttons to adjust, and 

SET/AL SET

 to confirm or exit.

Settings Menu order:

•  12/24 Hour Time • Hour •  Minute •  Year • Month • Date • Language
   (ENG, GER, FRE, SPA, ITA, DUT, DAN)

Language: 

When another language is selected, the weekday and menu 

items will be presented in that language.

Weekday:

 Weekday sets automatically when Year, Month and Date are 

set.

FA H R E N H E I T   O R   C E LC I U S

Press the ºF/ºC button to select Fahrenheit or Celsius temperature display.

MEM

/ RCC  

BARO

SET/AL SET 

฀\฀[฀<฀\฀S฀S฀$฀O฀Y

C/ F

B A R O M E T R I C   P R E S S U R E

View Pressure: 

Press the 

BARO

 button to view the Barometric Pressure in the time area. 

Change Pressure Value:

 1. Hold the 

BARO

 button for 3 seconds to enter Bormetric Pressure   

    Settings.
2. Use the 

ARROW

 buttons to adjust the value, then press the BARO  

     button to save and exit.

 1. Press the 

SET/AL SET

 button so the word “ALARM” shows in front of the 

time.

2. With the word “ALARM” showing, hold the 

SET/AL SET

 button to enter 

Alarm Settings. 

3. Use the 

ARROW 

buttons to adjust, and 

SET/AL SET

 to confirm and 

exit.

Alarm Menu order:

• Hour
• Minute

Activate/Deactivate Alarm:

Setting the alarm time and activating the alarm are separate actions.

 1. Press the 

SET/AL SET

 button so the word “ALARM” shows in front of the 

time.

2. Use the 

ARROW 

buttons to turn the alarm ON or OFF. When the 

alarm is active the Alarm Icon      will show.

Silence Alarm for 24-hours:

• When the alarm sounds, press any button to silence the alarm for   

   24-hours. 

• The Alarm Icon      will continue to show.

Alarm ON

Alarm OFF

Page | 2

Page | 3

Page | 4