La Marzocco USA | 1553 NW Ballard Way – Seattle, WA 98107
T. 206.706.9104 | F. 206.706.9106 | info.usa@lamarzocco.com | www.lamarzoccousa.com
1
Mazzer Major V, Robur S and Kony S Electronic
Q
UICK
S
TART
G
UIDE
NOTE
This guide is a supplement to the full Major V, Robur S and Kony S instruction manual and the
electronic interface guide, not a replacement. Reference the instruction manual for warnings,
important safety information and more detailed instructions on using your grinder.
Grinder Overview
Note: hoppers designed for
the Major, Robur or Kony
are not compatible with the
Major V, Robur S or Kony
S. The tongue is not long
enough to activate the
hopper safety switch.
Installation
1.
Remove grinder, hopper and accessories from box.
2.
Ensure grinder is on a stable surface and install hopper onto
grinder. Ensure the tongue of the hopper slides into the slot
to activate the safety
microswitch. Tighten the
hopper fixing pin to the grinder
body. Note: the grinder will not work without the hopper in
place.
3.
Screw the disk stopping pin into the disk stopping nut through a hole in the adjustment
disk. Screw adjustment disk handle into adjustment disk.
4.
If desired, install drip tray by sliding under front of grinder until it pops into place.
5.
Adjust the fork assembly to
properly fit your portafilter.
a.
Place your portafilter
into the forks by
positioning the
portafilter at a slight incline until the portafilter touches the stop/activation pin
then straighten the portafilter out.
