Lake Shore Cryotronics, Inc. 575 McCorkle Blvd Westerville, Ohio 43082
Tel: (614) 891-2244 Fax: (614) 818-1600 e-mail: info@lakeshore.com
Revision 1.1
P/N 119-845
September 1, 2015
Model 84032-FI and Model 84032P-FI Gate
Bias Option, Field Installation Addendum
I.
Introduction
The gate bias option provides bias voltage (up to 100 V) for gated Hall measurements, gated IV curves
and FET device characterization. This option includes the Keithley 6487 Picoammeter voltage source,
rack mount, and associated cables.
This addendum provides instructions for installing and connecting your gate bias option. All other
information can be found in the user’s manual.
II.
Unpacking
The Model 84032-FI is shipped in a box with the rack mount kit. Remove the packaging and set the
Keithley 6487 and all parts in a workspace near the console. The box contains the following:
1 Keithley 6487 Picoammeter voltage source
1 license file update software disc
1 half rack mount kit
1 dual half rack mount kit
Fuses for 100/120V operation and 220/240V operation
1 IEEE-488 cable
1 BNC-to-triaxial adapter
2 power cords
1 interlock adapter cable - 843-016 (Models 8404/8407 only, prior to 02/14/2014)
