1
Door height
Max.2400 mm
2401
−
2700
mm
Door width
590
−
1200 mm
700
−
1200 mm
Min. Door thickness
Min.
22 mm
Max. Door weight
35 kg / door
※
1
Vertical adjustment
2 mm upward, 4 mm downward
ABOUT THE PRODUCT
SPECIFICATIONS
FOR YOUR SAFETY AND CORRECT INSTALLATION
FD35EV SLIDING DOOR SYSTEM Installation Manual
(For Mortised, Drop or False Ceiling, with Surface Mount Rollers- with Dual Soft Close)
Part No. FD35EVDHCMP
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
●
This is a parts set for a sliding door system for residential
& commercial use.
●
The door closes in 2 soft motion steps; first slow, then
fast, and opens with 1 step soft motion.
●
The door can be installed without the use of tools.
・
The closing speed of the soft closing type door may change depending on
the ambient temperature, operating method or installation quality.
・
Recommended ambient temperature range is 5 to 40
℃
.
※
1
When using a light weight door, you may feel the resistance of
the soft closer when opening the door.
WARNING
If not followed, death or serious injury may result.
Caution
If not followed, injury or damage may result.
This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door
may fall and cause injury.
Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified
screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.
Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the
frame or door may cause failure.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
This product is a part for architectural fittings. After installation, please check the function and safety of the final product.
Please inform the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
Prohibited
Warning
Caution
Required
Meaning of symbols
