background image

1

Figure 1

Notes

1.

This manual is written with the assumption that the 
tractor is not supplied with rear remotes or backhoe.

2.

This valve kit is designed to operate hydraulic 
cylinders.

Assembly Instructions

Initial Preparations

1.

Park tractor on a flat surface, place gear shift lever in 
park, turn off engine, and remove ignition key.

Valve Assembly

Refer to Figure 1 & Figure 2:

1.

Remove hardware “A” used to mount the tractor’s 
loader control valve assembly “B”.

2.

Bolt Land Pride’s third function valve assembly in 
place by positioning mount bracket (#2) under the 
tractor’s loader control valve assembly “B”.

3.

Reinstall hardware “A” removed in step 1 to secure 
Land Pride’s third function valve as shown.

4.

Route hydraulic hoses (#12 & #13) under the tractor’s 
platform and back towards the rear of the tractor.

37117

A

B

2

13

12

11

9

10

Figure 2

Connect Hydraulic Hoses to Power 
Beyond Ports

1. Locate and remove hydraulic hose that connects 

power beyond port of tractor’s loader valve assembly 

to outlet block under the tractor platform.

Refer to Figure 2:

2. Connect hydraulic hose (#12) from “P” port of third 

function valve (#10) to the fitting in the power beyond 

port of loader valve where hydraulic hose was 

removed in step #1 above.

3. Connect hydraulic hose (#13) from “T” port of 

third function valve (#10) to fitting in outlet block 

where hydraulic hose was removed in step (#1)

4. Secure hoses (#12 & #13) to tractor as needed with 

cable ties (#3).

5. Check tractor hydraulic fluid level. If low, add 

recommended hydraulic fluid. Refer to your tractor 

Operator's Manual for recommended hydraulic fluid 

and procedure for checking hydraulic fluid level.

37118

Right-

Hand Side

Left-Hand 

Side

Attach to positive (+) post 
on the tractor battery

IMPORTANT:  

Land Pride recommends that your 

dealer connects hydraulic hoses (#12 & #13) to your 
tractor’s power beyond ports. Improper hook-up 
could cause damage to your tractor.

For L3200 & L3800 Kubota Tractors with LA524 Loader
For L3301 & L3901 Kubota Tractors with LA525 Loader
For L4701 Kubota Tractor with LA765 Loader 
For L4600 Kubota Tractor with LA764 Loader

380-153M

© Copyright 2014

Printed 10/05/15

Third Function Valve Kit #380-152A 
Installation Instructions

Reviews: