Ref Description Illustration Qty
Ref Description Illustration Qty
Head unit,
cable and
connector
Plug, LED Transformer
0.5m cable
Loom and junction box
Fixings kit
A
B
C
D
4
8
1
1
1
Adhesive pad
Screw
Tools Required (not supplied)
6mm Cross Headed Screwdriver
Pencil
Before You Start
•
Decide on an appropriate location for your product (see siting instructions below).
•
If you are in any doubt about installing this product, consult a qualified electrician.
Siting Instructions
1.
This product is designed for use under kitchen cupboards, bookshelves, cabinets etc.
Suitable for indoor use only. Not suitable for bathrooms.
2.
Do
not
attach to surfaces which are damp or freshly painted.
3.
The chosen location should allow for the product to be securely mounted and safely
connected to the mains supply (240V wall socket or fused outlet socket).
4.
Ensure cables are routed to avoid accidental damage or hazard.
29.07.11
Page 1 of 2
Installation
1.
Lay out/ measure the positions of the head units as desired. Ensure you route cables to avoid
accident or damage occurring. Cables can be taped to mounting surface after installation.
2.
Each head unit is supplied with 1m of cable. The cable from the junction box to the
transformer lead and plug 2.5m long. See Fig 1 for example layout.
White LED: 24907
Blue LED: 55495
1
Adhesive
pad cut-out
shapes
These instructions are for your safety. Please read through them thoroughly
before use and retain for future reference.
Installation and Safety Instructions
LAP LED Disk downlights kit 4pk
