background image

Sold & Distributed by Lark Outdoors, Austin, TX USA.   Assembly & Service by Polygroup Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong.

If you need help or encounter any problems, please call us at (888) 919-0070, between 8am - 5pm MST (extended operating hours may be available during holiday and peak seasons).

© 2020

®

OWNER’S MANUAL

SKIMMERPLUS

®

FILTER PUMP

FOR ABOVE GROUND SWIMMING POOLS

SFX330 Model

Thank you for your Lark Outdoors purchase!  Should you encounter any problems, please DO NOT return the product to your place of purchase.   

For assitance with product setup, parts or troubleshooting, please visit support.polygroupstore.com, or call our customer service team at +1 (888) 919-0070. 

All warranty claims and parts requests must be made directly to our service & support partner, Polygroup. Depending on the nature of the concern, you may 

be asked to return all or part of the product for inspection or repair. Making it right is our top priority!

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

For answers to common questions, setup videos and troubleshooting tips, 

please visit our support center at: 

support.polygroupstore.com

or call Customer Service at: 

+1 (888) 919-0070

To order parts, accessories, 

and to learn more about our 

products, please visit: 

www.larkoutdoors.com

DO NOT RETURN PRODUCT TO STORE

Summary of Contents for SKIMMERPLUS SFX330



















Reviews: