background image

IND-MD-DF-MGF-HH-R1 

Portable Battery Powered Electrostatic 

Cannon

16.4

'

 to 32.8'

 Spray Distance - 4.22G Tank Capacity - No-Contact Disinfection

 

Instruction Manual

Thank you for your purchase of the Larson Electronics I

IND-MD-DF-MGF-HH-R1

 Portable Battery Powered 

Electrostatic Sprayer. Please read these instructions and entirely and familiarize yourself with operations and 

maintenance practices pertaining to this product before operating. Keep these instructions for future reference, should 

you need them. 

Warnings and Safety

This sprayer should only be operated and maintained by someone who is familiar with it's operation and

 

correct maintenance practices as outlined in this manual.

Larson Electronics is not liable for decreased reliability, damages, or injuries due to improper

 

maintenance or modifications to the sprayer.

Be sure the lid is completely tightened before operating. 

Spillage could be poisonous

 and cause skin

 

irritation or other injury. Clean the outside of the tank if any spillage occurs, and immediately clean skin if

 

you come in contact with the chemicals inside.

Wear eye protection and gloves when filling the sprayer, 

avoid contact with skin and eyes

 while filling

 

and during operation.

Liquids being put into the tank must be filtered clean of particles in order to keep the nozzle from

 

becoming clogged. 

Do not use powders

 in the tank as this will cause buildup and clog the nozzle. If

 

using soluble solutions, mix them outside the tank and then filter before pouring into the tank.

ALWAYS REVIEW THE SAFETY INFORMATION AND WARNINGS FOR THE CHEMICALS USED IN

 

THIS SPRAYER. 

Larson Electronics is not responsible for any injury associated with the chemicals used

 

in the sprayer. Avoid using chemicals that are corrosive to metal or plastic. Always wear protective

 

equipment to avoid ingesting or coming into contact with harmful chemicals.

Do not

 use this sprayer in an explosive or flammable environment.

Always keep the sprayer dry and clean

. Do not submerge in water or use in overly wet location to

 

protect the motor and electronics from water damage.

The use of strong acids or bases is prohibited

. Other chemicals should be used in accordance with

 

manufacturer instructions and safety warnings.

Battery contains high voltage, 

DO NOT 

disassemble the sprayer yourself as electric shock could occur.

Avoid contact with other persons during operation. Avoid touching the spray rod and charging port during

 

operation.

Place a megaohmmeter in the area needing to be tested to make sure you have a true earth ground.

Avoid all possible insulators:

o

Do not wear insulated or rubber shoes. We recommend leather soles.

o

Do not stand on paper unless it is conductive.

o

Make sure the floor is clean and dry. Any liquid overspray on the ground can act as an insulator.

It is recommended to use a grounding strap. If using a grounding strap, make sure to always wear it

 

during operation. These are not included with unit.

Grounding straps can be connected to the unit by clamping to the cable attachment found on bottom of

 

the unit.

Larson Electronics, LLC

 

  Phone: (800) 369-6671 

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

Reviews: