background image

1.

 

Your new logger comes ready to go.

Simply press and hold the   button until the green LED lights up to start logging.

2.

 

Now place your logger in the location you want to monitor.

Once logging, pressing the   button will light up an LED to give a quick indication of the 

status. It will also add a marker to the data to show that you have checked it.

1RDODUPVZLOOEHWULJJHUHGLQWKHˉUVWPLQXWHVWRDOORZWKHORJJHUWRVHWWOHDWWKH

monitored conditions.

*UHHQVLQJOHˊDVK

The data logger is currently logging

No alarm has been triggered

No action required

5HGVLQJOHˊDVK

The data logger is currently logging

An alarm has been triggered!

Check alarm condition in PC software

 

*UHHQGRXEOHˊDVK

The data logger’s memory is full

No alarm was triggered

Plug your logger in to a PC and download 

your readings

 

5HGGRXEOHˊDVK

The data logger’s memory is full

An alarm was triggered!

Plug your logger in to a PC, download your 

readings and check alarm condition

1R/('VˊDVK

7KHGDWDORJJHULVVWRSSHGRUWKHEDWWHU\LVˊDW

Check the logger’s status using the PC software

Preset high 

and low alarm 

levels

Status LEDs

Sensor

Push to start

www.lascarelectronics.com/data-loggers

EasyLog CC-2

QUICK START GUIDE

ventas@lazodecontrol.com

+51 960 810 089

www.lazodecontrol.com

Reviews: