background image

Please read manual before you begin! 

Failure to follow this manual’s instructions may 

result in damage to the Triangle Power Base, 

AC adapter and/or Laser Pegs®. Not adhering to 

these instructions will void the manufacturer’s 

warranty. The packaging must be kept because 

it contains important information.

This manual is copyright and cannot be reproduced or used online without Laser 

Pegs®Ventures LLC permission. Copyright 2014  © All Rights Reserved US Patent 

#7,731,558  Additional Global & Multiple Patents Pending. Laser Pegs®Ventures 

LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com 

Each Laser Peg® is color coded on the circuit board inside 

each shape. There is No LED In The 90 Degree Peg.

www.LaserPegs.com

Color 

Code

Laser Pegs

®

 

Peg Cord

          

WARNING:

CHOKING HAZARD

-

Small parts. 

Not for children under 3 yrs.

Do not submerge in water.

All additional model instructions can 

be downloaded at www.LaserPegs.com

MODEL INSTRUCTIONS

EN71, RoHS COMPLIANT

This product complies to 

all safety requirements 

of ASTM F 963

G870B

AGES 5+

INDY CAR

LIGHTED

CONSTRUCTION SET INCLUDES:

• 20 Laser Pegs®
• 84 Construction Parts
• Triangle Power Base
• Instruction Manual
Requires 3 AA Batteries

Batteries NOT 

Included

Laser Peg® Parts List

Construction Parts List

SQUARE 

PEG

45° PEG

90° PEG

WHEEL PEG

Stackable

Y PEG

12

Any creation you can build

There is No LED In The 90 Degree Peg

x1

x6

x6

x6

x6

x4

x4

x4

x2

x2

x2

x2

x2

x2

x1

x1

x2

x5

x5

x3

x3

x12

x10

x3

x4

x4

x2

To construct with Laser Pegs®, slide two pieces together to form a 

connection. Slide each piece on and off smoothly. The 90° Pegs are 

essential to construction but they DO NOT LIGHT UP.

Connecting Pegs

WARNING! 

Each Laser Peg® draws current from the batteries. Therefore, the more 

pegs you use, the quicker you will deplete your battery power! As the power 

weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically 

the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs® 

are not broken, they just need stronger batteries or an AC Adapter.

 You have 3 simple options...

1. Use a 5-volt AC Adapter –available from www.LaserPegs.com

2. Change the batteries. 

3.  Use high quality batteries. They will last a little longer, but they will still deplete   

     rapidly the more laser pegs you connect!

Using an 

AC Adapter

Remove all batteries 

from Laser Pegs® power 

base before using the

5-volt AC adapter.

When using an AC 

Adapter, 

NEVER 

place the adapter 

plug into the Tri-

angle Power Base 

top peg holes.

*To avoid short-circuits, keep metal objects and 

other unauthorized materials from obstructing 

the peg holes.

The AC adapter and the Triangle Power Base are to be regularly examined for 

damage to the cord, plug, enclosure and other parts, and in the event of such 

damage, they must not be used until the damage has been repaired.

Never connect more than 200 

Laser Pegs®  when using a 5-volt 

(2000mA) AC Adapter.

Please dispose of batteries properly as per state and local regulations.

1.  Remove the three (3) screws.

2.  Place three (3) AA batteries in the correct   

      position - as displayed inside the Triangle   

      Power Base.

3.  Reassemble the Triangle Power Base.

4.  Replace the three (3) screws.

5.  Push RED Power Button to turn on!

6.  Do not mix old and new batteries.

7.  Do not mix alkaline, standard (carbon-

      zinc), or rechargeable (nickel-cadmium,   

      NiMH) batteries!

8.  Exhausted batteries are to be removed 

      from the Triangle Power Base.

9.  Never connect more than 200 Laser Pegs®

10. Non-rechargeable batteries are not to be  

       recharged.

11. Rechargeable batteries are only to be       

       recharged under adult supervision.

12. Rechargeable batteries are to be removed   

       from the toy before being recharged.

13. Batteries are to be inserted with the 

       correct polarity.

14. The supply terminals are not to be short-

       circuited.

15. DO NOT THROW BATTERIES INTO FIRE!

Replacing Batteries

Environmental Phenomena

* The unit may malfunction if subjected to radio-frequency interference. It SHOULD revert to

normal operation when the interference stops. If not, it may become necessary to turn the power

off and back on, or remove and reinstall the batteries.

* In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory,

requiring the user to reset the devise by removing and reinstalling the batteries.

WARNING: STROBE LIGHTS 

     MAY CAUSE SEIZURES

DO NOT SUBMERGE IN WATER

Remove the 3 Phillips head screws

3-AA Batteries

Remove the three Phillips head 

screws with a 4mm screw driver.

Requires (3AA) Batteries

Sound Activated 

Triangle Power Base

Red

Power Button

SOUND/ON/FLASH/FLASH FASTER

Peg Holes

AC Adapter 

Connection

Push Red 

Power Button 

to turn on/off

Push Red Power Button to 

cycle through 4 different 

light settings.

The toy is not to be connected to more than 

the recommended number of power supplies

Model

Difficulty 

Level

B

C

D

1

STEP

2

STEP

3

STEP

4

STEP

5

STEP

6

STEP

7

STEP

8

STEP

9

STEP

10

STEP

11

STEP

15

STEP

14

STEP

12

STEP

16

STEP

13

STEP

INDY CAR — A high performance automobile built for racing at incredible speeds.

INDY CAR

A

Reviews: