Laser Tools 5846 Instructions Download

Page: 1 / 4

www.lasertools.co.uk

Instructions

5846

Belt Tension Gauge

www.lasertools.co.uk

Distributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DR

+44 (0) 1926 815000

+44 (0) 1926 815888

info@toolconnection.co.uk

www.toolconnection.co.uk

If this product fails through faulty materials or workmanship, contact

our service department direct on:

+44 (0) 1926 818186

. Normal wear

and tear are excluded as are consumable items and abuse.

Guarantee

• The use of advanced technologies make this lightweight tension gauge both

convenient to use and simple to operate. Its ruggedness will allow many years

of use if the correct operating techniques are followed. Please read the following

instructions carefully and always keep this manual with the machine for reference.

• For specific belt tension settings always refer to the vehicle manufacturers data.

Specifications subject to change without notice.

Summary of Contents for 5846

Page 1: ...ect on 44 0 1926 818186 Normal wear and tear are excluded as are consumable items and abuse Guarantee The use of advanced technologies make this lightweight tension gauge both convenient to use and si...

Page 2: ...e machinery manufacturers data Calibration Procedure A feature of the Laser 5846 is its ability to be easily recalibrated by the user A calibration test belt rig is set up using a fixed and known weig...

Page 3: ...1 appears on the display stop tightening the clamp immediately or the measuring head will be damaged If this happens a new measuring head will need to be obtained and calibrated to the tester before u...

Page 4: ...tch on in the testing state it was last used in with the lower and upper limits and unit measurement range as set previously How to Set the Low Limit or the High Limit If required after referring to t...