background image

www.lasertools.co.uk

Instructions

1342

Torque Wrench

3/8

"

D

Guarantee Registration Form

Distributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DR

T

 +44 (0) 1926 815000  

F

 +44 (0) 1926 815888

info@toolconnection.co.uk  

www.toolconnection.co.uk

If this product fails through faulty materials or workmanship, contact our service 

department direct on: 

+44 (0) 1926 818186

. Normal wear and tear are excluded as 

are consumable items and abuse.

Guarantee

•  For first time use, or after a long period without use, 

adjust wrench up and down a few time to distribute 

lubricant throughout the mechanism.

•  Tighten in a slow and controlled manner and stop 

applying pressure immediately the required setting 

has been reached. Tightening too quickly will result 

in an inaccurate final torque figure.

•  Take care to stop applying further torque once the 

desired setting has been reached. Over-torqueing 

can damage the wrench.

•  After using the wrench, unlock and turn the adjuster 

to the lowest setting for storage. Take care not to turn 

the adjuster lower that the minimum torque setting or 

the mechanism may be damaged.

•  Never use the torque wrench to tighten a fastener to 

a higher torque than the maximum torque setting.

•  Take care of the torque wrench and keep it clean; do 

not store in areas of high temperature or humidity.

Please visit:

www.lasertools.co.uk/registration

for your online Guarantee Registration

Precautions

1342_INSTRUCTIONS_V12

Our warranty policy is one year from date of purchase. 

Please register your date of purchase by going to: 

www.lasertools.co.uk/product-registration

To register you will be asked for the following information:

Name and Address

Retailers Name and Town

Date of purchase (always keep receipt)

Part Number and Serial Number

The Serial Number can be found on your Certificate of 

Conformance in accordance with ISO 6789-1.

Warranty

Reviews: