LaserPerformance Zuma, Rigging Manual

ZUMA

ZUMA

Rigging Manual

1

Unpacking and preparation

2

 Assembly

3

 Launching

1. Unpacking and preparation

Useful 
knots 
to know

CLEAT

CLOVE HITCH

BOWLINE

SQUARE KNOT

FIGURE 8 OR 

STOPPER KNOT

Tools

: To rig your Zuma the fi rst 

time, you will need the following:

White electrical tape

• 

2 adjustable wrenches and/

• 

or pliers

Unpack the major parts listed below and lay them out on a soft piece of 

ground free of sharp objects. To avoid damaging contents, do not cut 

into packaging.

a

. Hull

b

. Mast kit which includes:

 Top 

section

  Bottom section (larger diameter)

  Boom (with blocks attached)

c

. Boat kit which includes:

Sail in bag

 Tiller

 Tiller 

extension

 Batten 

set

 Daggerboard

 Rudder 

assembly

  Line bag (all lines are labeled)

d

. Block package which includes:

 Mainsheet 

block

Double traveler block

  Vang block with v-cleat

  Small vang block with becket

 Shackle

Note

: All lines are as long as necessary for maximum purchase. Vanguard Sailboats 

encourages you to customize line lengths for your sailing pleasure, but be sure to cut and 

burn ends to prevent fraying.

Fogh Marine | 416 251-0384 | www.foghmarine.com | info@foghmarine.com