Aug. Laukhuff GmbH & Co. KG August-Laukhuff-Straße 1 D-97990 Weikersheim
Telephone: +49 7934/9160-0 Fax: +49 7934/616 E-Mail: info@laukhuff.de
www.laukhuff.de
User Instructions
Universal Slider Action Solenoid S.1
V2.1
– HW rev. 15 – SW rev. 1.7
The S.1 magnet sets the benchmark for the most advanced generation of slider solenoids. It uses four
optical sensors for measuring the motion speed of the slider. The automatic force adjustment feature sets
the perfect speed assuring that the magnet comes to a soft and silent stop at the end position. The
control circuitry readjusts the force in case of load changes so that the slider moves at optimum speed
and reaches the exact end position without fail.
Wiring:
The S.1 magnet is compatible with most standard controllers. The polarity of the control signal
can be changed by a solder bridge on the circuit board.
Positive input (standard)
Negative input
The magnet can be controlled by way of a continuous RS signal (stop switch) which is applied as
long as the stop is engaged, or by way of pulsed ON-OFF signals generated by some capture
systems.
RS mode
ON-OFF mode
Positive input
Positive input
Negative input
Negative input
Rotary switch for function
Set button
Solder bridge for
control signal
replaceable fuse
TR5 - 6,3A slow
