background image

Cleaning

 Products should be rinsed with clean 

water and then washed with a mild detergent 

solution using a bristle brush or sponge. Care 

should be taken not to apply undue pressure 

that may damage labels. Flush clean with water 

after washing. Non heated pressure washer can 

be used at no closer the 400mm away from the 

unit. The Pressure should be no more than 100 

Bar.

Tools

 Chalk, Hammer, drill, 15mm masonry 

drill bit, 17mm socket or spanner, lock Key 

(if applicable), 25mm Spade Cutter.

PPE

 Always wear appropriate PPE  

equipment and follow safety guidelines.

Installation guide

 

Centrum Forecourt

LEAFIELD litter products

enter 

fax number

Post

Leafield W

ay

Leafield Industrial Estate

Corsham, Wiltshire

SN13 9UD

Telephone

01225 816500

Fax

01225 816501

Email

litter

@leafieldenv.com

Website

www

.leafield-environmental.com

Ballast filling

From inside the bin remove the cap

Place the bin onto the floor on its back.

Feed 20kg of gravel into the ballast hole.  
Gravel dimension - 6.5 - 15 mm (individual partical 
size).  

1

3

2

Quality Standards

 All Leafield Environmental 

products are cer

tificated to BS EN ISO

Reviews: