D
ia
12
mm
Ground fixing
bolt x 3
Washer
bolt x 3
Note:
Ground fixing to asphalt is not recommended
(concrete or paving slab base recommended)
Using a hand drill, turn the bin base over and
drill through the ground fixing locators as
shown.
Turn the base over, remembering to position in the
correct orientation. Use the masonry drill to drill
though each location hole marking the ground.
Drill 12mm holes in all 3 marked locations.
Remove the debris from the holes.
PPE
Always wear appropriate PPE
equipment and follow safety guidelines.
Quality Standards
All Leafield Environmental
products are cer
tificated to BS EN ISO
