Revision A 17/12/2018
1
www.leeandplumpton.co.uk
ASSEMBLY INSTRUCTIONS
RANGE
Signature
REF:
Espagnolette Lock System
Read this leaflet before
assembly
ESPAGNOLETTE - SCREW FIXING
TOOLS REQUIRED
BEFORE YOU BEGIN...
• Check you have all the tools and components required
• Keep children and animals away from small parts
• Ensure you have adequate space
• Assemble product on a flat, clean surface
• Apply manual handling guidelines when building this item
• Pan head screwdriver
Screw the Stop Pins to the Top & Base
in the pair of holes close together.
Ensure the pin is set to the inside.
Espagnolette Lock System
Screw the Door Stops to the Top & Base
in the pair of holes further apart.
Ensure the vertical part is set to the outside.
Lock
Stop Pin
Locking Hook
Rod Guide
Stop Pin
Locking Hook
Rod Guide
Rods
(2x screw 5/8” x 4g csk)
(2x screw 5/8” x 4g csk)
(2x screw 5/8” x 4g csk)
(2x screw 1” x 4g csk)
(2x screw 1” x 4g csk)
(2x screw 1” x 4g csk)
(2x screw 1” x 4g csk)
(2x screw 5/8” x 4g csk)
(2x screw 5/8” x 6g pan head)
Screw the Z shaped door catch on the Left Hand
door with screws in the holes furthest from the edge.
1 Person
Required