A
3
Owner’s Instructions
Lock-n-Load
™
Lever Action Grease Gun
Part No. : L1148L
A. Slide Lock-n-Load
™
switch.
B. Push barrel into head
and release
Lock-n-Load
™
switch.
Unlock follower rod.
Pull follower rod from
barrel and lock into
place as shown.
YOU MUST PERFORM
THIS STEP BEFORE
DISENGAGING BARREL
FROM HEAD.
1
Automatic Bleeder
• Bleeds air when reconnecting
the barrel and head.
• Reduces air locks & priming
problems.
• If air does not escape quickly,
press screw to bleed.
A. Push barrel into head
B. Slide Lock-n-Load
™
switch.
C. Disengage barrel
from head.
Load new cartridge
into barrel.
IMPORTANT
-
follow each step in sequence to ensure proper loading of grease
Position right hand on gun barrel as
shown. Hold gun head with left hand,
left thumb on Lock-n-Load
™
switch.
2
A
B
C
B
Legacy Manufacturing Company
6281 North Gateway Drive
Marion, IA, 52302, U.S.A.
Ph: 319.373.7305
Fx: 319.373.7309
info@legacymfg.com
legacymfg.com
INS1148L
( Published 03/14/2013 )
Lock-n-Load™ technology is protected by the following patents:
U.S. Patent No. 8,297,476
Foreign Patents Pending
Cartridge Loading Procedure:
