121406E (07-01854) F511
1
Legend Brands, Inc.
Owner’s Manual
Dri-Eaz Extraction Tool
Model F511
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! Do not alter or modify your
Extraction Tool in any way. Use only
replacement parts authorized Legend Brands,
Inc. Modifications or use of unapproved parts could
create a hazard and will void your warranty. Contact
your authorized Dri-Eaz distributor for assistance.
BEFORE YOU BEGIN
Warranty registration
Visit
Warranty.LegendBrandsRestoration.com
to register
your purchase. Registration allows us to better assist
you with using, maintaining or servicing your equipment,
as well as to contact you in case we have important
safety information concerning this product. If you
determine service is required, have your equipment
model, serial number and original proof of purchase
available and call your distributor for assistance with
obtaining a return material authorization (RMA).
MAINTENANCE
As needed:
1. Wipe unit clean with a mild detergent. Do not use
abrasive cleaners or strong cleaning agents.
2. If view window becomes dirty, remove and wash in
warm, soapy water. Do not use abrasive cleaners. Flush
out interior of wand head with clear water.
3. Inspect vacuum break seal. If seal is torn or worn,
contact your Dri-Eaz distributor for a replacement.
4. Inspect extraction glide for wear or damage. If the
head is deeply scratched or excessively worn, contact
your Dri-Eaz distributor for a replacement.
EXTRACTION TIPS
1. For best results, use the tool with a professional
extractor such as the portable HVE 3000 or a
truckmount extractor. Consumer-type wet/dry vacuums
do not provide adequate vacuum.
2. Move the tool back and forth in long overlapping
strokes. Keep the extraction glide flat to the surface. It is
not necessary to press down on the tool.
3. If the vacuum pressure causes the tool to “grab” the
surface, briefly squeeze the vacuum break to release the
tool, then resume extraction.
SERVICE
For parts and service call your local Dri-Eaz distributor.
Copies of the Extraction Tool manual and related
information are available at
Go to
Warranty.LegendBrandsRestoration.com
purchase.
WARNING:
This product and other substances that may become
airborne from its use contain chemicals, including lead, known to the
State of California to cause cancer, birth defects, or other
reproductive harm. For more information, go to P65Warnings.ca.gov
SPECIFICATIONS
Model
Dri-Eaz Extraction Tool F511
Weight
8.2 lbs. | 3.7 kg
Dimensions
Tube diameter: 2 in. (o.d.)
Head width: 14 in. | 35.6 cm
Handle height: 42 in. | 106.7 cm
Total length: 52 in. | 132.1 cm
Tube thickness: 0.035 in. | 0.089 cm
Construction
Stainless steel tube and vacuum break
assembly; rotomolded handle and extraction
head; plastic extraction guide.
Specifications are subject to change without notice. Some values
may be approximate.
PARTS IDENTIFICATION
Vacuum break lever.
Squeeze to release
vacuum.
View window.
View extraction
progress. Window panel may be
removed for cleaning as needed.
Handle.
May be
used right- or left-
handed.
Extraction glide.
May be
replaced when damaged or
worn.
Vacuum hose
attachment.
