background image

NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.

FACEPLATE KITS

P/N 506033-33 

Rev. NC, 03/200

HEARTH PRODUCTS

KITS AND ACCESSORIES

Figure 1 - Kit Contents

KIT CONTENTS

1 ea. Arch or Traditional Faceplate (item #4)

1 ea. Spring Handle  (item #5)

1 ea. Tube Of Anti-seize (item #6)

2 ea. #6 x 1” Carriage Bolt (item #1)

2 ea. #6 Nut (item #2)

1 ea. Lennox Nameplate - Gold (item #3)

1 ea. Country Nameplate - Gold (item #3)

1 ea. Instruction Sheet

TOOLS NEEDED

5/32” Allen Wrench or T-Handle Wrench

Open End Wrench - 5/16”

GENERAL INFORMATION

These decorative faceplate kits are offered in various attractive finishes to 
accentuate the look of your wood stove or wood fireplace insert. 

Take great care when handling the faceplates to prevent scratching.

If you encounter any problems, need clarification of these instructions 
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.

Read this instruction sheet in its entirety before beginning the installa-
tion.

ALL  WARNINGS  AND  PRECAUTIONS  IN  THE  INSTALLATION  AND 
OPERATION  MANUAL  PROVIDED  WITH  THE  APPLIANCE  APPLY  TO 
THESE INSTRUCTIONS.

ALLOW THE STOVE OR INSERT TO COMPLETELY COOL BEFORE PRO-
CEEDING.

INSTALLATION INSTRUCTIONS FOR INSTALLING FACEPLATE KITS 
FOR USE WITH MODELS S60, SS20, ST20, S260, ST30, C60, C20, 
C260, E260 AND C30 WOOD STOVES AND WOOD FIREPLACE INSERTS

     IMPORTANT 

Be sure to clean plated surfaces with a soft cloth 

and household glass cleaner prior to burning the 

stove  or  insert.  Fingerprints  left  on  the  plated 

surfaces while burning may remain on the finish 

permanently.

Faceplate Kit  (Includes Faceplate, Handle and Nameplate)

For Models: C260, E260, C30, S260 and ST30

Cat. No.

Model

Description

H7903

TRAD-FPK-BG-LG Traditional Faceplate Kit, Brushed Gold

H7906

TRAD-FPK-G-LG

Traditional Faceplate Kit, Gold

Faceplate Kits (Includes Faceplate, Handle and Nameplate)

For Models: C60, C20, S60, ST20 and SS20

Cat. No.

Model

Description

H790

ARCH-FPK-BG

Arch Faceplate/Brushed Gold

H7902

TRAD-FPK-BG-SM

Traditional Faceplate/Brushed Gold

H7904

ARCH-FPK-G

Arch Faceplate/Gold

H7905

TRAD-FPK-G-SM

Traditional Faceplate/Gold

4

5

4

6

2

3

Arch Faceplate

Traditional Faceplate

Summary of Contents for TRAD-FPK-BG-LG

Page 1: ...NGS AND PRECAUTIONS IN THE INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS ALLOW THE STOVE OR INSERT TO COMPLETELY COOL BEFORE PRO CEEDING INSTALLATION INSTRUCTIONS FOR INSTALLING FACEPLATE kitS for use with MODELS S160 SS210 ST210 S260 ST310 C160 C210 C260 E260 and C310 WOOD STOVES and wood fireplace inserts IMPORTANT Be sure to clean plated surfaces with...

Page 2: ...tighten the screws If the screws are over tightened the glass may crack when the stove is hot Figure 4 Figure 5 Step 3 RemoveFaceplate Beadvisedthatthefaceplatealsofunctionsas a glass retainer see Figure 6 Make sure to apply inward pres sure on the glass while removing the faceplate IMPORTANT PRESS THE GLASS INWARD TO ENSURE THE GLASS STAYS IN THE GROOVE AND DOES NOT FALL OUT AND BREAK Figure 6 Fi...

Page 3: ...the widest side of the washers is in the direction of the glass as shown in Figure 9 Do not tighten screws completely at this time The door will have up and down play Place a level on top of the door to level the faceplate Once the faceplate is level tighten the six screws The washers should have a slight bow once they are tightened Figure 9 Figure 10 Step 6 ReinstallSpringHandle Slidethespringhan...

Page 4: ...e firebox door to allow access to the underside of the smoke hood and secure the carriage bolts using the 6 nuts REMOVAL INSTRUCTIONS Remove the nameplate in the reverse order of installation 1 3 2 Smoke Hood Figure 12 NAMEPLATE OPTIONS This instruction sheet explains how to install a nameplate onto a wood burning stove or insert Your new Country Collection wood burning appliance includes a nickel...

Reviews: