WARNINGS AND CAUTIONS
• Use only (1) Decora Digital DDS15 Switch in a multi-location circuit with up to 9 coordinating remote switches (DD0SR-10)
or up to 4 matching remote switches (DD0SR-DL)
• Maximum wire length from dimmer to all installed remotes cannot exceed 300 ft (90m).
• Recommended minimum wall box depth is 2-3/4".
• Use this device
with copper or copper clad wire only
.
3-Way Wiring with DD0SR-10 Coordinating Remote
(no LED) Application:
Preparing and connecting wires:
This switch can be wired using side wire terminal screws or
through backwire openings. Choose appropriate wire stripping
specifications accordingly.
WARNING:
TO AVOID FIRE SHOCK OR DEATH; TURN
OFF POWER
at circuit breaker or fuse and test that power is off
before wiring!
Identifying your wiring application (most common):
NOTE:
If the wiring in your wall box does not resemble any of
these configurations, consult an electrician.
Single Pole (One location) or 3-Way (Multi-location)
Universal Electronic Switch and Program Timer
Cat. No. DDS15-BD, (Lighted) - 120/277VAC, 60Hz
1800W Incandescent (120V) – 15A Fluorescent (120V) – 6A Fluorescent (277V)
5A, 600W LED/CFL (120V) – 15A Resistive (120V) – 1/2 HP Motor (120V)
INSTALLATION INSTRUCTIONS
DI-000-DDS15-02A
TOOLS NEEDED TO INSTALL YOUR SWITCH
Slotted/Phillips Screwdriver
Electrical Tape
Pliers
Pencil
Cutters
Ruler
Changing the color of your Switch:
Your switch includes three color options. The switch ships with the White
frame attached. To change color of frame, proceed as follows:
INSTALLING YOUR SWITCH
NOTE:
Use check boxes when Steps are completed.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Step 1
2
4
3
1
Single Pole
1.
Line (Hot)
2.
Neutral
3.
Ground
4.
Load
2
5
4
3
1
3-Way
1.
Line or Load
(see
important instruction)
2.
Neutral
3.
Ground
4.
First Traveler – note color
5.
Second Traveler – note
color
Step 2
IMPORTANT :
For 3-Way applications, note that one of the screw terminals
from the old switch being removed will usually be a different color (Black)
or labeled Common. Tag that wire with electrical tape and identify as the
common (Line or Load) in both the switch wall box and remote wall box.
Terminal
Screw marked
Black (BK)
Terminal
Screw marked
Red (RD)
Terminal Label:
Use terminal for 3-way or more applications only.
For single-pole applications, DO NOT remove label.
Terminal
Screw marked
White (WH)
Terminal
Screw marked
Yellow/Red
(YL/RD)
2
4
WH
BK
RD
YL/RD
1
3
Single Pole Wiring Application:
Step 4a
Step 3
• Make sure that the ends of the wires from the wall box are
straight (cut if necessary).
• Remove insulation from each wire in the wall box as shown.
• For Single-Pole Application, go to Step 4a.
• For 3-Way Coordinating Remote (no LED) Application, go to Step 4b.
• For 3-Way Matching Remote (with LED) Application, go to Step 4c.
5/8"
(1.6 cm)
Strip Gage
(measure bare
wire here)
Cut
(if necessary)
Side Wire Connection
Side wire terminals accept #14-12
AWG
solid copper wire only
.
Back Wire Connection
Back wire openings accept #14-12
AWG
solid copper wire only
.
Hot (Black)
Neutral (White)
Load
Switch
BK
Black
White
RD
Green
Ground
YL/RD
Line
120/277VAC,
60Hz
Use terminal for
3-way or more
applications only.
For single-pole
applications,
DO NOT remove label.
WH
WIRING SWITCH:
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot wall box wire to terminal screw marked "BK".
• Load wall box wire to terminal screw marked "RD".
• Line Neutral wall box wire to terminal screw marked "WH".
• Switch terminal screw marked "YL/RD" should have Red insulation label affixed.
NOTE:
If insulating label is not affixed to terminal screw marked "YL/RD", use
electrical tape to cover.
•
Proceed to Step 5.
• Switch ON/OFF
• ON/OFF LED Indicator
• Three way communication
• Ease of installation – No new wiring
The next generation of lighting control technology is here with
the new Decora
®
Digital Switch with Bluetooth
®
Technology. This
innovative device works using the Leviton Decora
®
Digital Dimmer &
Timer app that can be easily downloaded to smartphones or tablets
and paired to the Leviton Switch using Bluetooth
®
technology.
Decora
®
Digital Devices give users point-to-point local control to
automate lighting, bridging the gap between standard switches and
whole-house automation systems.
Enjoy the combined functions of a standard wall switch and
a countdown or programmable timer switch in one attractive
device. Use of the app allows greater flexibility for accurate timer
functionality and makes pushing buttons for timed events a tedious
chore of the past.
The Leviton Decora
®
Digital Dimmer & Timer app can be easily
downloaded to mobile devices and is compatible with Android and
iOS smartphones or tablets. The app is easy to use with simple,
intuitive on-screen menu options to independently control Decora
®
Digital dimmers and switches throughout the home.
Decora
®
Digital Devices are ideal for living rooms, bedrooms,
kitchens, dining rooms, home offices, outdoor lighting or anywhere
full control of lighting is desired.
FEATURES
INTRODUCTION
Switch
Coordinating Remote (no LED)
Terminal
Screw
marked
Black (BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw marked
White (WH)
Terminal
Screw
marked
Yellow/Red
(YL/RD)
2
4
Terminal
Screw marked
Yellow/Red (YL/RD)
2
4
1
WH
BK
RD
YL/RD
WH
BK
RD
YL/RD
1
Neutral to Terminal
Screw marked
White (WH)
3
3
5
5
Terminal
Screw
marked
Black (BK)
Terminal
Screw
marked
Yellow/Red
(YL/RD)
Green
Ground
Green
Ground
Hot (Black)
Neutral (White)
Coordinating Remote (no LED)
YL/RD
YL/RD
RD
WH
RD
BK
Black
BK
WH
White
Line
120/277VAC
60Hz
(unused)
(unused)
Load
Switch
Step 4b
Step 4b cont’d
NOTE:
The switch must be installed in a wall box that has a Line
Hot connection. The coordinating remote must be installed in a wall
box with a Load connection and a Neutral connection. A Neutral
wire to the coordinating remote needs to be added as shown. If
you are unsure about any part of these instructions, consult an
electrician.
NOTE:
Maximum wire length from switch to all installed remotes
cannot exceed 300 ft (90 m).
WIRING SWITCH (wall box with line hot connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when
removing old switch to terminal screw marked "BK".
• First Traveler wall box wire to terminal screw marked "RD"
(note wire color)
.
• Remove Red insulating label from terminal screw marked
"YL/RD".
• Second Traveler wall box wire to terminal screw marked
"YL/RD"
(note wire color)
. This traveler from the switch must go
to the terminal screw on the remote marked "YL/RD".
• Line Neutral wall box wire to terminal screw marked "WH".
WIRING COORDINATING REMOTE (wall box with load
connection):
Connect wires per WIRING DIAGRAM as follows:
NOTE:
"BK" and "RD" terminals on coordinating remote are
unused. Tighten both screws.
• Green or bare copper wire in wall box to Green terminal screw.
• Load wall box wire identified (tagged) when removing old switch
to First Traveler
(note color as above)
.
• Second Traveler wall box wire
(note color as above)
to terminal
screw marked "YL/RD". This traveler from the remote must go to
the terminal screw on the switch marked "YL/RD".
• Remove White insulating label from terminal screw marked
"WH".
• Line Neutral wall box wire to terminal screw marked "WH".
• Proceed to Step 5.
WARNINGS AND CAUTIONS
• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
at circuit breaker or fuse and test that power is off before wiring!
• TO AVOID FIRE, PERSONAL INJURY OR PROPERTY DAMAGE, DO NOT
install to control a receptacle.
•
To be installed and/or used in accordance with electrical codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
•
The Decora
®
DDS15 is not compatible with standard 3-way or 4-way switches. It must be used with the Decora
®
Digital DD0SR-DL or DD0SR-10 remote for
multi-location dimming.
1
2
Insert top
tabs and
press in
bottom
tabs to
attach
Push in
sides at
bottom tabs
and pull
outward to
release
