LEXIBOOK TMP241, Manual

Congratulations

on the purchase of your 

Lexibook

®

TM240 series 

PERSONAL ASSISTANT

.  This new PERSONAL ASSISTANT generation 

includes many useful features designed to ease the organisation of your daily
schedule and personal information. 

The CD-ROM included contains Lexibook’s SyncMan

®

2 software program for

installation on a personal computer. Together with Internet access, you can
connect to Lexibook’s exclusive Internet services site at https//my.lexibook.com,
which provides both useful and interesting information which can be downloaded
to your personal computer and then synchronised* with your TM240.

* Some information may not always be able to be synchronised with your TM240.

Before you start using the TouchMan

®

240 Series, you must carefully remove the

static label protecting the LCD display and pull out the plastic battery tab at the
rear of the unit. After you have done this, you need to reset the unit:
1. Insert a blunt object, such as an opened paper clip, into the 

RESET

hole (at the

rear of the unit) and press gently. 

RESET ?

will be displayed on the screen. 

2. Press 

to confirm. Display shows 

RESET !

during the reset period (just a few

seconds).

3. Then the display shows local time screen.

NOTE:

Doing a reset will delete all information stored in the unit as well as the

secret code if unit has been used previously.

Switching the unit on and off:

Press 

key to switch the unit on or off.

TouchMan

®

240 PERSONAL ASSISTANT will power-off automatically after

5 minutes if unused.

Battery replacement:

1. Switch your unit off and open the battery cover at the rear of the unit. 
2. Replace used battery with a new, high quality CR2032 cell battery with (+) 

polarity facing up.
Note: There are 

2 batteries

. The left one is for the main unit operation. The right

one is for screen backlight. If only the backlight does not work anymore change
only the battery on the right. If the PDA screen contrast is very low or does not
turn 

ON

, then change the left battery and check if the backlight works properly

(before changing the right battery also).

3. Display shows 

RESET?

. Select 

N

and press 

or press 

N

key to NOT reset

the unit and keep your information stored in the memory.

IMPORTANT!

Be sure to complete battery replacement within 1 minute in order

to keep your stored information safe.

Introduction

Copyright © Lexibook 200

6

1