AppleTalk and MarkNet print servers
Print materials
Supplies
Troubleshooting
Administration
1
Printing
www.lexmark.com
Lexmark J110
Why you need to change the AppleTalk type
The J110 printer requires that you change the AppleTalk type in order for you to print
AppleTalk network print jobs.
Before you change the setting
Verify your printer hardware setup is complete. Refer to the printer setup guide for detailed
instructions.
Change the AppleTalk type
If you have TCP/IP available on your network, we recommend you assign an IP address to
the MarkNet print server. Running TCP/IP with your print server lets you use the full range of
print management tools and perform the easiest configuration.
Method 1 is an easy way to change the AppleTalk type for IP configured print servers. You
can use Method 2 as well.
If you are not running TCP/IP, you must use Method 2.
