background image

E-911 and This Phone’s Use with Multi-Line Telephone 
Systems

Please note that the use and operation of this phone as 
part of a multi-line telephone system (MLTS) may be sub-
ject to state and/or federal E-911 MLTS laws that require 
the MLTS to provide a caller’s telephone number, exten-
sion, and physical location to applicable state and/or lo-
cal emergency services when a caller initiates a 911 call.  
This phone does not provide a caller’s telephone number, 
extension, or physical location information to emergency 
services when a caller dials 911, and compliance with state 
and/or federal E-911 MLTS laws is the sole responsibility of 
the purchaser of this phone.

Regulatory Information and Disclaimers

“Privacy of communications may not be ensured when us-
ing this telephone”.

Any changes or modifications made to this device that are 
not expressly approved by the manufacturer may void the 
user’s authority to operate the equipment. The Manufactur-
er is not responsible for any radio or television interference 
caused by unauthorized modification of this device, or the 
substitution or attachment of connecting cables and equip-
ment other than those specified by the manufacturer.   It is 
the responsibility for the user to correct any interference 
caused by such unauthorized modification, substitution or 
attachment. 

The manufacturer and its authorized resellers or distribu-
tors will assume no liability for any damage or violation of 
government regulations arising from failure to comply with 
these guideline.

Pursuant to Part 15 of the Federal Communications 
Commission(FCC) Rules, the user is cautioned that chang-
es or modifications not expressly approved by LG-Nortel. 
Could void the user’s authority to operate this equipment.

Important Safety Instructions

USA-FCC (Federal Communications Commission) 
Statement

This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions: 

FCC Interference Statement

Note: 

This equipment has been tested and found to com-

ply with the limits for a Class B Device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency and, if not installed and 
used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there 
is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:

Compliance Statement for Canada

This Class B digital apparatus complies with Canadian 
ICES-003.

Cet appareil numérique de la classe B est conforme à la 
norme NMB-003 du Canada.

This device complies with Class B Limits of Industry Cana-
da. Operation is subject to the following two conditions; 

European Union Declarations of Conformity

LG-Nortel Co. Ltd. declares that the equipment specified in 
this document, which bears the “CE” mark, conforms to the 
European Union Radio and Telecommunications Terminal 
Equipment Directive (R&TTE 1999/5/EC), including Elec-
tromagnetic Compatibility Directive (2004/108/EC) and 
Low Voltage Directive (2006/95/EC).

The product fulfills the essential requirements of the har-
monized standards shown above.

Product Safety Instructions 

This product complies with and conforms to the following 
international Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950-1, 
including Relevant national deviations as listed in Compli-
ance with IEC for Electrical Equipment (IECEE)  Safety of 
Information Technology Equipment, CAN/CSA-C22.2 No. 
60950-1/UL 60950-1

Regulatory and Safety Information

Please save these instructions and read carefully

Printed In Thailand. Copyright © 2008 LG-Nortel Co.Ltd. All rights reserved.

P/NO: MMBB1234567,1.0 

This device may not cause harmful interference, and

This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.

1

 

2

 

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and 
receiver.

Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV techni-
cian for help.

1

 

2

 

3

 

4

 

This device may not cause harmful interference, and 

This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.

1

 

2

 

Before connecting or using your new phone, take a 
moment to consider safety and reliability. Use common 
sense when locating, connecting and using you Phone.

Locate on a dry level surface away. Keep the phone away 
from the edges of the surface to avoid the potential of 
a fall.

Locate cables to avoid potential for damage. For exam-
ple, do not locate under rugs or carpet as damage may 
result from foot traffic or heavy objects. Also, do not lo-
cate cables between the desktop and walls where they 
may be crushed, damaging the insulation.

Check the cables regularly and, if damage is noted, dis-
connect your phone. Contact your local representa-tive 
for a replacement.

Should liquid spill on the phone, disconnect the unit from 
power and the network.

Do not use during lightning storms. Lightning presents a 
potentially lethal shock hazard.

Clean the phone with a soft dry cloth; do not use liquid 
cleaners.

Always use caution when connecting to AC power. Use 
only with a properly grounded standard AC power outlet.

Regulatory and Safety Information 1.0.indd   1

Regulatory and Safety Information 1.0.indd   1

2008-01-24   오후 3:14:55

2008-01-24   오후 3:14:55

Summary of Contents for IP8820






Reviews: