background image

4

1

2

3

7

5

3

. Die 4 Schrauben lösen und die

Gummipfropfen etwas drehen, um sie

zusammen mit den Schrauben abzunehmen.

Die 4 Schrauben und den Schraubenschlüssel

für späteren Gebrauch aufbewahren.

• Die Transportsicherungsschrauben müssen vor

jedem Transport des Geräts wieder angebracht

werden.

4

. Die Schraubenbohrungen mit den

beiliegenden Kappen verschließen.

1

2

3

4

Schraubenschlüssel

6

 

60 - 100 cm

@

N

Green and Yellow(Earth)

Brown(Live)

Blue(Neutral)

Fuse

Cord

grip

E

L

N

Adjustable feet

Adjustable feet

CAUTION

The appliance is not intended for use by young children or infi rm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance. 

Disposal

•  When this crossed-out wheeled bin symbol is attached to a product it means the product is 

covered by European Directive 2002/96/EC.

•  All electrical and electronic products should be disposed of separately from municipal 

waste stream via designated collection facilities appointed by the government or the local 

authorities.

•  The correct disposal of your old appliance will help prevent potential adverse consequences 

for the environment and human health.

•  For more detailed information about disposal of your old appliance, please contact your city 

offi ce, waste disposal service or the shop where you purchased the product.

Owner

s Manual

F1403TDS(1~9)
F1203TDS(1~9)

Safety instructions for use

Read all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the 

operating instructions handy for later use. If the appliance is sold or passed on then ensure that the new owner 

always receives these operating instructions. The following warnings must be strictly observed for safety rea-

sons. They must be read before installing the appliance and putting it into operation.  

•  Intended use: This appliance has been designed exclusively for use in dry-interior households. Use the appliance only 

with cold drinking water and only for washing textiles with washing detergents designed for washing machines. Every 

other use is improper and may lead to injuries, whereby the liability of the manufacturer will cease.

•  This appliance may only be used by adults. Do not allow children to touch the controls or to play with the product. 

•  Never modify the appliance on your own, as this is dangerous. 

•  This appliance is heavy. Transporting with care. 

•  Remove all packaging and transport bolts before using the appliance. Otherwise serious damage may result. 

•  All installation work must be carried out by a qualifi ed fi tter or technician. 

•  Have electrical connections done by a qualifi ed electrician. 

•  Never place the appliance on the power cord. 

•  If the appliance is placed on a carpet then place the feet so that air can circulate underneath the appliance. 

•  Always unplug the machine and turn off the water supply after use. Disconnect appliance by pulling only the plug 

- never disconnect by pulling the power cord. Never touch the plug with wet fi ngers or hands.

•  Do not overload the appliance. 

•  Wash only machine-washable textiles. If you have doubts regarding this, then observe the markings on the label.

•  Never place electrical heaters, candles etc. in the vicinity of the appliance. They could cause the appliance to ignite or 

parts to warp.

•  Protect the appliance from wet and damp. Otherwise, there is danger of electric shock and fi re. 

•  Connect the appliance to a suitable wall socket for 220-240V. Never use an extension cord or double adapter. 

•  Empty all pockets. Hard or sharp objects such as coins, needles, nails, screws or stones may cause serious damage.

Unbalanced mass may create heavy vibrations. If heavy vibrations remain also without load, call for an authorized 

customer service. 

•  Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive 

substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in 

fi re or explosion. 

•  Never insert products coated with mineral oils (e.g. nylon coating, plastic belts, etc. ) into the machine. If a stain re-

mover has been used then make sure that the solvent has been carefully washed out before inserting the clothes into 

the appliance. Oil may remain in the tub after a whole cycle resulting in fi re during drying.  So, do not load oily clothes. 

•  Do not operate the appliance at locations where fl ammable substances are present such as oil, benzene or highly 

infl ammable gas. Such materials may cause fi re or explosion. Never use combustible detergents.

•  Only add the prescribed amount of softener. Excessive amounts may damage the clothes. 

•  After washing, keep the drum door open to protect the door seal. 

•  Make sure that all water has run off before opening the door. Never open the door if water still remains. Danger of 

scalding.

•  Animals and children may get into the washing machine. So always check the appliance before using it. 

•  During washing, the glass door becomes very hot. Keep children away from the appliance when in operation. 

•  Never try to repair the machine yourself. Incorrect repairs may result in injuries and/or serious defects to the machine. 

•  The product should be serviced and repaired only by the authorised customer service using original replacement 

parts. 

•  When disposing of your old machine, the power cable must be capped and the door lock must be made unusable in 

order to protect children. 

•  When placing on a carpeted fl oor, make sure that the opening in the socket is not blocked. 

•   If the appliance has been under water then contact the customer service. There is danger of electric shock and fi re.

•   The cover cup of the fi lter as well as the dispenser drawer may not be opened during the operation.

•  Keep all washing powder and detergents away from children. Danger of poisoning

Before use please read carefully the safety instructions!

Thank you for buying an LG fully automatic washing machine. 

Please read this owner‘s manual carefully, it provides instructions on safe installation, use and maintenance. 

Keep it handy for future reference of this machine. Make a note of the model and serial numbers of your washing machine.

Remove Packaging

  Requirements for installation site

Transit bolts

Electrical connection

•  The appliance is fi tted with transit bolts to prevent internal 

damage during transport. 

Be careful, heavy load!

•  Packing and all transit bolts must be removed before using 

the washing machine. 

•  When unpacking the base, be sure to remove the additional 

packing support in the middle of the base packing.

Store original packing for future move.

Dispose of packing material according to local regulations.

Unscrew the 4 bolts 

using the spanner 

supplied.

Level fl oor:

 Permissible fl oor gradient under entire washing machine 

is 1˚ . 

Power socket:

 Must be within 100 cm of either side of location of 

washing machine. Do not overload the socket with more than one 

appliance. 

  

Additional Clearance:

 For wall, fl oor and door space is needed. 

(10cm: rear / 2cm:right & left side). Do not place or store laundry pro-

ducts on top of the washing machine at any times. They can damage 

the fi nish or controls of the machine.

•  The drain hose should not be placed higher than 100 cm above the fl oor. 

•  Proper securing of the drain hose will protect the fl oor from damage due to any water leakage. 

•  If the drain hose is too long do not force back into the washing machine. This will cause unusual noise.

•  Proper level-adjustment of the washing ma-

chine prevents excessive noise and vibration. 

Install the appliance on a solid and level fl oor 

surface, preferably in a corner of the room.  

•  If the fl oor is uneven, adjust feet as required. 

(Do not insert pieces of wood etc. under the 

feet). Make sure that all four feet are stable 

and resting on the fl oor. Then check that 

the appliance is perfectly level. (Use a spirit 

level).

Safety instuctions for the installation

CAUTION about positioning the appliance

CAUTION about the power cord

CAUTION about location and moving

CAUTION about the fl oor surface

Rattling and clanking noise

 

Extraneous objects such as coins or safety pins maybe in drum or pump.

Thumping sound

 

Heavy wash loads may produce a thumping sound. This is usually normal.

Vibrating noise

 

Have all transit bolts and packing been removed?

Water leaks.

 

Check and tighten hose connections. Unclog drain pipe. 

   

Contact plumber if necessary.

Excessive suds

 

Too much detergent or unsuitable detergent.

Washing machine does not start

 

Power cord may not be plugged in or connection may be loose.

Washing machine won’t spin

 

Check that the door is fi rmly shut.

Door does not open

 

Once started, the door can not be opened for safety reasons.

   

Wait one or two minutes before opening the door to allow the electric

   

locking mechanism time to release.

Troubleshooting

Level adjustment

To prevent internal dama-

ge during transport, the 

special 4 bolts are locked. 

If they are not removed, it 

may cause heavy vibrati-

on, noise and machine to 

malfunction.

Installation of drain hose

Technical Specifi cation

i

5

Connecting water supply hose

•   Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. 
•   Make sure the connection to taps is tight enough. 
•   Periodically check the condition of the hose and replace the hose if necessary. 
•   Make sure that there is no kink on the hose and that it is not crushed.

Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)

Don’t strip or crossthread when connecting inlet hose to the valve.

If the water supply pressure is more than 1000kPa, a decompression 

device should be installed.

If after completing connection water leaks from the hose, repeat the same steps. Use the most conventional 

type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting 

the tap into the adaptor.

i

The hose supplied with the machine must be used. Old hoses may not be reused

Close the holes with 

the caps supplied.

Remove the 4 bolts 

along with the rubber

bungs by slightly 

twisting the bung.

P/No. :MFL59755582

For the U.K. customer

CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454)  Fax. : +44-(0) 844 847 1413

LGEUK SERVICE WEB-SITE : http://www.lge.co.uk

Reviews: